cab

Forum Replies Created

Viewing 15 posts - 331 through 345 (of 423 total)
  • Author
    Posts
  • in reply to: aeg dishwasher leak into base #190251
    cab
    Participant

    Re: aeg dishwasher leak into base

    dont know just going off TDS must be some difference! :rolls:

    cab

    in reply to: zanussi dishwasher #190438
    cab
    Participant

    Re: zanussi dishwasher

    hi

    Zanussi produce a modification, sorry an IMPROVEMENT, which requires replacing the valve adding a pressure switch and a bit of wiring change, but it is only suitable for certain models, which model are you having probs with.

    cab

    in reply to: zanussi tumble dryer model tce7276w #190374
    cab
    Participant

    Re: zanussi tumble dryer model tce7276w

    havent had any problems fitted a few, have one on van stock describe the moulding difference and I will compare it

    cab

    in reply to: aeg dishwasher leak into base #190248
    cab
    Participant

    Re: aeg dishwasher leak into base

    hi side tank probably is blocked but its not the type mal suggests, there are two different ones depending on the product no. & elc code (two digits after 9 number code)
    911232014-00 8996464034702
    911232014-01 1118129004

    cab

    in reply to: Zanussi FLE1215W fault #190157
    cab
    Participant

    sent you a p.m.

    cab

    in reply to: Kenwood d/w KDW12SS fault #190173
    cab
    Participant

    Re: Kenwood d/w KDW12SS fault

    no its dry as a bone the first one that I`ve been to that hasnt leaked.

    cab

    in reply to: Zanussi FLE1215W fault #190155
    cab
    Participant

    Re: Zanussi FLE1215W fault

    have you been able to access the diagostic to find a fault code, could be anything, does it flash any codes (read the lights flashing down right hand side. Have had a few user boards fail.

    cab

    in reply to: zanussi wds1183.how old????? #190161
    cab
    Participant

    Re: zanussi wds1183.how old?????

    hi drop the first digit of the year 99 – 9 week 45 945—-

    cab

    in reply to: adp 8332.optical water indicator???? #190099
    cab
    Participant

    Re: adp 8332.optical water indicator????

    hi its a 2 inch diameter black thing! fits into sump, if you take out filters absorb water out of sump you will see it on right hand side, it can be cleaned, if the users are scruffy gets, it clogs up, if after cleaning it still shows error it will need replacing.


    cliff

    in reply to: WHATS THE FASTEST WAY OF DEFROSTING A FROST FREE? #189129
    cab
    Participant

    Re: WHATS THE FASTEST WAY OF DEFROSTING A FROST FREE?

    been to some samsungs, expert appliances been to, and used steamers, the back panel has been melted to expose the insulation!!!!! 😯

    in reply to: AEG W/D no neg to dryer heater #190036
    cab
    Participant

    Re: AEG W/D no neg to dryer heater

    Hi looking at wiring diagram etc neutral goes thru overheat stat which I believe is the manually resettable stat on side of drier duct. after that it goes into module, hope this of some help.

    cab

    in reply to: DeLonghi DFS903 Noisy Cooling? Fan Problem #189450
    cab
    Participant

    Re: DeLonghi DFS903 Noisy Cooling? Fan Problem

    the mod envolves fitting a spacer into the original fan which should only cost a couple of quid, click on the red toolbox to find a repairer in your area.

    cab

    in reply to: DeLonghi DFS903 Noisy Cooling? Fan Problem #189448
    cab
    Participant

    Re: DeLonghi DFS903 Noisy Cooling? Fan Problem

    hi if this is a gas hob version it needs a technician, from experience delonghi is the same as elba and kenwood, same s*** different name, they have had problems with the cooling fan and a modification is required.

    cab

    in reply to: Zanussi DES959 #189524
    cab
    Participant

    Re: Zanussi DES959

    as peguin45 said it is designed as an overfill/antiflood device but they lock out under pressure hence the modification. turn off the water supply to machine, disconnect water fill hose at machine, refit hose at machine, start machine on program then turn water on only half way, this sometimes resets the valve.

    cab

    in reply to: Zanussi DES959 #189520
    cab
    Participant

    Re: Zanussi DES959

    THE VAVE HAS A MECHANICAL LOCK WHICH IS PRESSURE OPERATED THIS HAS PROBABLY LOCKED, THERE IS A VERY TECHNICAL MODIFICATION ON THE EARLIER ZANUSSI`S DONT KNOW IF IT FITS THIS MODEL FOR SURE.

    CAB

Viewing 15 posts - 331 through 345 (of 423 total)