Forum Replies Created
-
Posts
-
Re: smeg a1 Tipo 2B7 thermostat
it’s a single oven so it will be the main oven thermostat.It is burning the food.with the gas pots on top i’m assuming it has to be pulled out and entry through the back.cheers k
Re: Bosch WAS24466
definitely the inlet hose Paul.If you hold it you can feel it pulsing.I know what you mean about the drain hose,the newer models have them in a harness. I fitted new brushes and serviced/cleaned com the motor a few months back.It meg checked fine and is purring like a pussycat!I will check the pcb though,just putting it out to see if anyone had encountered the problem before.thanks for your replies
Re: whirlpool S20BRSB21
thanks guys,i’ve had more info from custoner.it was tripping when she was closing the door,now its tripping without using doors so will look at defrost heater and that area, the door opening was throwing me!
Re: Beko WMB61431 blown pcb
ok thanks for your help,when the programme and start is selected, the wash light comes on but nothing happens.It appears not to be sending/getting any signal from the door lock,there’s continuity through the cable when disconected from pcb & lock so your theory may be right.regards
Re: Hotpoint WMD960
ok thanks,
The clanking on full spin- i’m presuming the spider has a hair line crack and is hitting the heater? also i’ve never had bother getting a heating element out before, but this one will only come out about 10mm,again i’m presuming its been bent by the contact with the inner drum?
Interested to know your thoughts.regards
