[char14lew]

Thanks Don, is there any chance you can forward that diagram please? darrellclilverd@aol.com Many Thanks

[char14lew]

if the green fridge temperature display isn’t flashing, I’d check the freezer evaporator for icing!

[char14lew]

Re: miele W1513 E60

you see this a lot on Hoover washers- poor motors!

[char14lew]

Re: hotpoint ff200mx display board dead

no lights at all on display Dave,i’ll take it out and have a look.
cheers Darrell

[char14lew]

Re: samsung RSH1DBBP pcb diagram

Thank you mate, I use that site but didn’t think to look on there for this!
if you forward your email i’ve picked up some rangemaster info that might be useful to you?
cheers

[char14lew]

Re: seimens HB55M550B/03 pcb relay

Thanks Dave, did look at those-rs said they didn’t have anything alternative. Will look again tomorrow.

[char14lew]

Re: maytag MWA10149WH f22

yeah have that info thanks Dave, just wondered if anyone new about the e05 as it’s an unlisted fault or had repaired the board. thanks

[char14lew]

Re: RSG5UCRS ice route cover

Thanks Lawrence

[char14lew]

Re: Hoover DYC893B-80 Alarm light flashing

thanks, checked all that mate. flushed that pipe through running the pump live

[char14lew]

Re: S51M53X1GB/01 heat pump

Thanks Dave, changed the relays only not ntc. I’very checked the resistance of heater and ntc from the service information and they check ok.
Thanks for all your help!

[char14lew]

Re: Miele classic washing machine leak

when you say you have removed all hoses- have you removed the breather hose that comes off the side of the water path control box into the top off the tub?
this causes an air lock when blocked and causes the water to exit the dispenser drawer.
hope this helps
Darrell

[char14lew]

Re: Maytag GZ2727GEHW Scale in ice cubes

thanks Steve

[char14lew]

Re: Belling 100DF 444445412 thermostat

spoke to Dave from integral who specialises in ovens and he’s said what happens is people turn the control knob clockwise like on a normal oven which breaks the selector switch and pops the stat of the prongs!
makes sense to me- I think the stat itself is fine, it clicks on/off and changes resistance when turned on the multimeter, just have to fight through the grime taking the pots and top off now!
hope this helps

[char14lew]

Re: Belling 100DF 444445412 thermostat

thanks for your replies guys, the indicator light goes out when it knocks the heat off Dave, and Seamy yes the stat had come off the locating prongs but it will only connect back in two postions- the other way around doesn’t work at all!
the overheat stat has continuity also.
The control knob doesn’t feel smooth like on the other oven stat when tuned around to minimum. Can you get to the selector switch without taking the top off-the oven’s minging and the srews on the sides probably won’t move for the grease? lol!
cheers Darrell

[char14lew]

Re: electrolux TF613 thermostat

thank you Don, much appreciated.
Darrell

[Author]

Posts