Forum Replies Created
-
Posts
-
Re: AEG L16830 washer dryer
Thanks martin , valve was ok , and dont think condensor was at fault either , as no heat from the off , but i will check when i return and hope for the best with the ntc wires .
😀Re: Odd Miele condenser dryer fault
overheat stat tripping in…. could be restricted duct or inside blockage , or less likely stat failure
Re: Brittania SI-CLSS-SS range cooker
thanks tc ; i had tried them but no luck . £66 odd quid for a pair of hinges from Brittania it is 😯
Re: Brittania SI-CLSS-SS range cooker
Thanks loaf , I contacted them earlier…… Going to need a mortgage to get them, I think 😯
Re: Samsung f/f Model RS21DABB S/N 210042BLA00470 Y
a1al wrote:Hi guys
Thanks for the replies
Told customer to try samsung as per ypur advice she just rang me to thank me and to let me know they will repair it free of charge.
Why would they do this when it outside the warranty period??
curious, a1al
http://www.ukwhitegoods.co.uk/modules.p … e&sid=2088 that will explain all 😀Re: Lee’s DSG Thread
DrDill wrote:
Maybe all Lee8 ‘ s posts should now be placed in the recycle bin!
Maybe a seperate forum could be started , where he can only contribute to or start threads …. that would stop his ridiculous hi jacking of threads with his useless inane drivel . It could be called ” dont bother reading , waste of time ” thread ?
Re: Samsung f/f Model RS21DABB S/N 210042BLA00470 Y
fridge defrost and fridge fan errors…. likely to be duff def sensor, and / or defrost heater and / or drain heater ….and probably needs new evap cover too . Up to 5 years old, and Samsung will do this free for the customer
Re: best news article for today…
I wonder how long it will be before he sues the homeowner for distress and possesion of an undersized window frame , along with loss of earnings and trauma compensation ?
Toe rag should be paraded through the town with the frame still stuck around him and wearing a tutu 😆Re: whirlpool AVM965/1x microwave/ cooker hood combo…….
eastlmark wrote:next time I go on one I must remember to take a can opener…after 150 screws removed I still found myself peering under bent up bits of sheet metal, covered in grease and still no further near finding the fault, fuming I am!
is this the one with 3 or 4 different sizes of torx screws , and the one when you undo what you think is the right screws, only to watch a large chunk of metal plummet towards the shiny new granite worktop , which then bungees up with mms to spare and on it’s return path manages to pull every single wire to pieces before the pcb disintegrates 😳 😳 ?
Re: whirlpool AVM965/1x microwave/ cooker hood combo…….
:rotfl: Mark , you could have saved time just typing Whirlpool as a title 😆
