[chezza]

Re: Maytag washing machine belt

JLA across in Ripponden used to do these, I would bet they still have stocks if you are stuck

[chezza]

Re: fitting problem

Ah, the 1600!
The noise when the PMC blew was enough to warrant change of clothing to a young keen engineer 🙂
Not to mention trying to refit the red string and indicator pointer to the correct position so the timer was actually doing what the pointer said it was….. No doubt where my hair loss programme began

[chezza]

Re: Samsung RS7567BHCBC parts diagram

r600a wrote:What pert of the manual do you need ? as its 20mb and can’t normally be received by most e mail users ?

Bryan
Thanks Bryan,
it is the parts diagram and part number sections for the fridge room I am looking for ( evaporator, cover,water bottle, element ) . If it is the same as RH7 models, I can access those ok, I wasn’t sure it was the same though .
Eddie

[chezza]

Re: QUALTEX

BTVC

[chezza]

Re: zanussi zwh 7122j w/machine

adv wrote:👿 well back to this today blew down pressure switch and pipe :death:

That’s something else you will need to replace then

[chezza]

Re: Leisure Zenith 110 DF NG Static oven grill/upper Element

This unit has 2 cavities on the left hand side, the smaller upper has 2 separate grill elements, the larger lower is a static oven with a dual element… it is actually a Rangemaster.
grill elements are P038435 ( there are 2 of these)
the twin element for the static oven is P026810
There is 1 cavity on the right which is the fan oven.

[chezza]

Re: How many engineers in the uk??

stevebunyan wrote:

Could I ask 4 things?
1. How many engineers in your company? (If you have figures for manufactures that would also be helpful)
6 including me
2. Are you looking to increase your numbers if so by how many?
yes, 1 or 2
3. Has any one done any research into this before?
❓
4. Has any one retired from you company this year 2015-2016
no, can’t wait though 😆

Thanks

[chezza]

Re: SAMSUNG – MARTIN DAWES

I bailed out in 2011, yet still get e mails regarding updates etc… often couple a month.
Clueless robotic management brown nosing to their superiors 😡

[chezza]

Re: Samsung RSA1UTMG s/n Y6584ADF601097B

Also worth checking the thin polystyrene sheet on the back of the plastic cover at the top of the freezer…. They had a habit of soaking up moisture, resulting in a series of bumps when it freezes instead of a nice smooth surface, letting the fan blades catch on the bumps

[chezza]

Re: Whirlpool 859204215010 heater replacement

allan73 wrote:I’m having trouble fitting an element to Whirlpool WWDC8420/2, the part number of element I’m fitting is : c00312066. Has anyone else had trouble fitting these the bugger keeps popping back out when I tighten it ?

Allan

That is the correct part number Allan. not sure why it is popping out though 😕

[chezza]

Re: Payments – First4Service

Yep, Monday also

[chezza]

Re: Service Power

Agreed, very good firm to deal with

[chezza]

Re: Hotpoint 9605 top loader.

eastlmark wrote:I have no idea what you lot are talking about……

Really Mark? 😉

[chezza]

Re: samsung rsh1 with blown fuse in mains filter pcb

I used to find it was almost always one of the internal bulbs or the icemaker solenoid that caused these to blow, though I have had the odd one that was never obvious or problematic after replacing

[chezza]

Re: Daewoo american fridge freezer not freezing ice

Fully agree with the evap fan, very common on these

[Author]

Posts