Forum Replies Created
-
Posts
-
Re: Belling F/F BK66CRM
TC2, TC3, & C3 ok also. TC1 on other side has no middle leg – looks intentional though. What are DU1 and DU2? Is VR1 a cap? (purple? thingy), 11 o clock to P1.
C.Re: Greedy Whirlpool prices
A “righteous” suggestion by rocketman.
Such a source for cross-referencing spare parts commonality by price would prove very useful.
CRe: Whirlpool dryer 3rleq8033rwo
BTW well done on the rugby victory. National pride aside, I am happy for gatland, he was very badly treated by IRFU imho.
Re: miele t494c not collecting water and burning clothes
On some of the older miele dryers, you need to remove the drum to view the interesting bits and have a poke around. Funny that the rcd hasn’t tripped. The burning smell needs to be investigated anyway, so drum out. Sometimes the heating relay gets stuck, check by carefully sliding top off relay and view contacts. Also check if fluff hasn’t built up around thermostat on the heater (rear of drum). Also are the carbon brushes on the top of drum (moisture sensors) aren’t worn down.
Good luck and let me know how you get on.
Conor!Re: miele t494c not collecting water and burning clothes
Hi,
Not collecting water certainly suggests blockage or gunk preventing condensate pump working. Has the machine ever tripped the MCB/RCD? If there isn’t a removable panel at the rear of machine at 6 o’ clock position, I fear the drum needs removing to get at the reservoir. Not too bad to do, just need a bit of space. Is there a clear plastic hose visible at front of machine and have you tried blowing thru it?
Conor!
