cornwell40

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 1,670 total)
1 2 3 4 5 … 110 111 112
  • Author
    Posts
  • November 13, 2019 at 11:10 am in reply to: Neff B57CR22N0B/08 dead. #464561
    cornwell40
    Participant

    My thinking as well;). Customer has flagged a doubt up because he ‘Googled’ the oven and found references to the facia board causing these faults regularly. I’ve looked around and can find nowt about it. Told a customer off last week for mentioning Google as all it does is set the job off on the wrong foot. Sign of the times s’pose.:(

    August 29, 2019 at 11:18 pm in reply to: Massive fire at Whirlpool (Hotpoint) Peterborough factory #463023
    cornwell40
    Participant

    If you look at the front page of the General Trade posts it states ‘Massive fire at Whirlpool Peterborough factory’ and underneath….started by Iadom:o:o

    July 10, 2019 at 12:31 pm in reply to: Anyone familiar with Samsung Waterwall dishwashers? #462343
    cornwell40
    Participant

    No Samsung experts about then

    March 17, 2019 at 11:01 pm in reply to: Miele W3740 F63 #460860
    cornwell40
    Participant

    Hi Baron. Many thanks.

    March 14, 2019 at 6:27 pm in reply to: Hotpoint TCM580BP leaks #460032
    cornwell40
    Participant

    New condenser cured it. Seals worn as they cleaned the condenser every time they used the dryer!!

    November 20, 2018 at 9:13 pm in reply to: Hotpoint BD32B MK2 oven hinge runners #459152
    cornwell40
    Participant

    Many thanks Dave. I’m presuming 518 is the runner and it’s x2. This oven is turning into a nightmare job, never seen runners like this before. What was wrong with the Mk1 then??? 😉

    October 7, 2018 at 8:42 pm in reply to: HPT WMBF742P UK.M dispenser top #458379
    cornwell40
    Participant

    Cheers Gents, code is 85965710000. 🙂

    June 22, 2018 at 6:42 am in reply to: Beko QWM84 blockage aftermath #456464
    cornwell40
    Participant

    Re: Beko QWM84 blockage aftermath

    Oops. Looks like I edited out a vital bit of info from the original script. It should have read
    One thing I’ve noticed is that the motor is meggering at 5 MOhm, other than that everything tests fine during the spin programme. 😳

    April 13, 2018 at 10:35 pm in reply to: What a winker #455289
    cornwell40
    Participant

    Re: What a winker

    Cheers all, the call out charge is just that with labour added later. We still get ”swipes putting the phone down when you mention it.
    Thanks for the good wishes, hopefully last of it now I’ve been ablated :eeek:

    Tony

    April 3, 2018 at 11:17 pm in reply to: Whirlpool integrated fridge freezer ART495n/f #455133
    cornwell40
    Participant

    Re: Whirlpool integrated fridge freezer ART495n/f

    That’s great Dave, many thanks for that.

    February 10, 2018 at 12:09 am in reply to: Beko zb531 top drawer #453802
    cornwell40
    Participant

    Re: Beko zb531 top drawer

    Many thanks Gents. Same number as we’ve got for it……too big :bang:

    February 9, 2018 at 12:58 pm in reply to: Beko zb531 top drawer #453799
    cornwell40
    Participant

    Re: Beko zb531 top drawer

    Do you have a number for the three same size ones Ken? What Connect show as the upper ones is way too big. Cheers.

    October 20, 2017 at 9:55 am in reply to: Eslr9c lincat commercial cooker #451252
    cornwell40
    Participant

    Re: Eslr9c lincat commercial cooker

    Thanks again for your help. Neutral in switch box was melting when hot.

    October 19, 2017 at 12:04 pm in reply to: Eslr9c lincat commercial cooker #451251
    cornwell40
    Participant

    Re: Eslr9c lincat commercial cooker

    Many thanks.

    August 8, 2017 at 10:07 pm in reply to: AEGF66603VIOP Poor wash results #449413
    cornwell40
    Participant

    Re: AEGF66603VIOP Poor wash results

    Thanks Dave, customer decided to but new before I got back to her……donchajuslovvem

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 1,670 total)
1 2 3 4 5 … 110 111 112