Forum Replies Created
-
Posts
-
Re: Hotpoitn 9414 Twin Tub – Service Manual
I have a copy for the 9404, don’t think there is much difference between the models.
Let me have your email and I can send it to you.Colin
Re: INDESIT DISHWASHER DPG15WHUK
– Turbine faulty or disconnected;
– Connector terminals not making contact;
– Turbine wiring faulty;
– Turbine faulty, disconnected or wet;
– WATER has been introduced manually;
– Filler hose fi lter obstructed;
– Pressure switch faulty.Re: SMEG DWI710E1 error code?
I think thats the diverter valve.
Re: flavel Milona 100
The thermal link has now been changed to the cut out and is no longer available
Re: Cooling impeller Hotpoint ctd00
FAN
From Serial number 60907.0001 the fixing dimensions to the motor shaft changed.
With this change to the motor shaft a new version of cooling fan was introduced, the original and new versions of fan are not
interchangeable. The original fan C00207723 (1703002) can only be fitted to a model produced before serial number 60907.0001
A further change has been made to the original fan C00207723 (1703002) this has been replaced in service by a fan that is shorter
in length to 72mm part code C00095599. The fitting of this fan does not effect the performance of the condenser drying process.
For ‘C’ Energy models a change has also been made in production to the fan as fitted from serial number 60907.0001 C00199451
(1703672) this has been replaced by a fan that is shorter in length 72mm part code C00272335. The fitting of this fan does not
affect the performance of the condenser drying process.Found The Above
Colin
Re: Indesit IDF125 flashing 1 + 2 + 3 fault
Module has detected no Turbine rotation. check turbine (Flow Meter)
and wiring
