crockett

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 37 total)
  • Author
    Posts
  • in reply to: Hotpoint fridge RLA84G freezing #376385
    crockett
    Participant

    Re: Hotpoint fridge RLA84G freezing

    Thanks again Snig I’ll try and find a way arround all that and let you know if and how I succeed its either try something or scrap it and scrapping seems to be a bit of a waste, crockett.

    Sent from my GT-S5830 using Tapatalk 2

    in reply to: Hotpoint fridge RLA84G freezing #376383
    crockett
    Participant

    Re: Hotpoint fridge RLA84G freezing

    Thanks Snig would that tube not be on the evaporator ?and do you know if the evaporator is foamed into insulatoin? or can it be got at by any means other than ripping into the insulation so as to reinstate the phial tube and phial to its correct location so as to regulate the fridge at its proper temperatures ? Thanks again for your help,crockett.

    Sent from my GT-S5830 using Tapatalk 2

    in reply to: Bosch wae28162gb tripping consumer unit #372052
    crockett
    Participant

    Re: Bosch wae28162gb tripping consumer unit

    Thanks Martin will check wall socket and have a closer look at everything in the workshop thanks again for your prompt reply.Apologies about wrong forum section I will use proper one front now on. cheers crockett .

    Sent from my GT-S5830 using Tapatalk

    in reply to: Plastic Outer Drum repair? #371230
    crockett
    Participant

    Re: Plastic Outer Drum repair?

    I use fiberglass and resin bought in kit form at halfords brilliant for a hole approx. half inch diameter,make sure and roughen the smooth outer drum surface with emery paper to form a good bond,works a treat, crockett.

    Sent from my GT-S5830 using Tapatalk

    in reply to: Amica AZM616W dishwasher #368113
    crockett
    Participant

    Re: Amica AZM616W dishwasher

    Sorry for the misspell JONAH

    Sent from my GT-S5830 using Tapatalk

    in reply to: Amica AZM616W dishwasher #368112
    crockett
    Participant

    Re: Amica AZM616W dishwasher

    Thanks Johan for your reply tought it might be water in the base tray.Customer says its not two years old
    yet so I told her it may be under warrenty and when she checked it is parts and labour free. The lady will let me know how she gets on with the repair company and I’ll let you know the result,thanks again, regards crockett.

    Sent from my GT-S5830 using Tapatalk

    in reply to: Candy CDI 1012/B-80 Integrated dishwasher fault codes #366432
    crockett
    Participant

    Re: Candy CDI 1012/B-80 Integrated dishwasher fault codes

    Just to let you all know out there that the retailer replaced the above dishwasher and also paid the cost of installing the new one thanks for all the help. crockett.

    Sent from my GT-S5830 using Tapatalk

    in reply to: Candy CDI 1012/B-80 Integrated dishwasher fault codes #366430
    crockett
    Participant

    Re: Candy CDI 1012/B-80 Integrated dishwasher fault codes

    Thanks all for your help,I called to look at the above machine today,4 flashing lights continuously,Icould not get the machine to go into test mode (Thanks Bob for the info)decided to have a look and found water in the base tray activating the antiflood device(switch),didn’t see any obvious leaks.This machine is under warrenty and never washed a dish so I had no option but to let the warrenty people sort it out,thanks again,crockett.

    in reply to: Candy CDI 1012/B-80 Integrated dishwasher fault codes #366429
    crockett
    Participant

    Re: Candy CDI 1012/B-80 Integrated dishwasher fault codes

    Thanks very much Bob I’m waiting for them to come true I’m having a little trouble with my email I should have it sorted soon,much appreciated crockett.

    in reply to: Candy CDI 1012/B-80 Integrated dishwasher fault codes #366427
    crockett
    Participant

    Re: Candy CDI 1012/B-80 Integrated dishwasher fault codes

    Thanks Bob will do immediately,Crockett.

    in reply to: Trade Is Dying (Again) #363250
    crockett
    Participant

    Re: Re: Trade Is Dying (Again)

    Martin wrote:

    kwatt wrote:
    Split the topic as it was going way off on a tangent.

    What’s with all this splitting topics recently Ken? The overall theme (topic) is not lost in spite of the odd few members taking the subject off topic. A short reminder by yourself or your lieutenants to those that go off topic is all that is required. Instead of that all we are now left with are 3 topics taking about the same stuff, it’s like a bleedin’ paper chase now. 👿
    Crockett here, interesting stuff,I’m reasonable new to this trade and I hoping to continue in it until I’m asked to fix the man’s
    above (or below?) because I love what I’m doing therefore to make sure I reach the pearly gates still doing the same work WE need to keep ahead of the possie and thanks to this forum we will. (think positive) .Most of us say when on a call is, first, ” don’t panic”. Thanks to all who post, crockett.

    Sent from my HTC Wildfire S A510e using Tapatalk

    in reply to: UK W comes up trumphs again #365138
    crockett
    Participant

    Re: UK W comes up trumphs again

    I am under the same impression Martin and if I’m wrong my account is outstanding and would wish to settle it immediately. Crockett.


    Sent from my HTC Wildfire S A510e using Tapatalk

    in reply to: work car or van #363533
    crockett
    Participant

    Re: work car or van

    I’m only a novice yet taught of buying a van but my car is a vw Sharan diesel its brilliant ,45/50 miles to the gallon low mantainance and with seats removed loads of space for anything up to 5 machines and still handy for the weekends when dropping off or picking up the kids don’t know how I’ll manage when I’ll have to change I
    Surpose I’ll be looking for advice here, cheers Crockett.
    Sent from my HTC Wildfire S A510e using Tapatalk

    in reply to: whirlpool integrated dishwasher adg756 #362073
    crockett
    Participant

    Re: whirlpool integrated dishwasher adg756

    Thanks nigegt and EFS for your replies,the diaphragm and switch are working perfectly,I’ve had alook at the p.c.b. and found a damaged capacitor which I removed and I am waiting to get a replacement its one of two that are similar on the board light blue in colour at 4.7 meu f and 400v,I’ll let you all know how I get on but it might take me some time to get the part,thanks again for your replies, crockett.

    in reply to: Beko s512w cooker #359529
    crockett
    Participant

    Re: Beko s512w cooker

    Thanks Seamy,I’ll advise the customer of that,yesterday she said she’d have to put the christmas dinner on now to have it cooked on time.
    Regards to all, Crockett.

Viewing 15 posts - 16 through 30 (of 37 total)