Dansta

Forum Replies Created

Viewing 10 posts - 31 through 40 (of 40 total)
  • Author
    Posts
  • in reply to: Dishwasher Whirlpool ADG7560/1 #276232
    Dansta
    Participant

    Re: Dishwasher Whirlpool ADG7560/1

    Has it got an N.T.C in the rhs of the sump or is it an older model?

    in reply to: SMEG D/W MODEL DF614BE #276063
    Dansta
    Participant

    Re: SMEG D/W MODEL DF614BE

    not had it cause the cycle to stop though,might be overfilling aswell,check the plug on the pressure switch(front rhs)the sometimes burn out.

    in reply to: SMEG D/W MODEL DF614BE #276062
    Dansta
    Participant

    Re: SMEG D/W MODEL DF614BE

    Its the salt regen solenoid,had it a few times,dan

    in reply to: neff microwave #275410
    Dansta
    Participant

    Re: neff microwave

    Is it one of the older types with a seperate mechanical dial for the oven?If so there are 2 small glass fuses in the control p.c.b that usualy blow,I find replacing the diodes sorts the prob most of the time.

    in reply to: NEFF D/W #247917
    Dansta
    Participant

    Re: NEFF D/W

    Has the pressure chamber on the LHS been checked and also the metering hose connected to it because they can “gunge-up” and cause this problem.

    in reply to: bendix bwd1012 #235548
    Dansta
    Participant

    Re: bendix bwd1012

    Was it emptying properly?

    in reply to: ZANUSSI ZWF1430W #E90 #223027
    Dansta
    Participant

    Re: ZANUSSI ZWF1430W #E90

    found it,thanks for help. Dan

    in reply to: Samsung SxS SRS2028ALS #195055
    Dansta
    Participant

    Re: Samsung SxS SRS2028ALS

    no but will check on Monday, Cheers

    in reply to: neff oven #185695
    Dansta
    Participant

    Re: neff oven

    ive had one where the sensor was to close the the grill element,conventional and fan oven will work fine but as soon as you put the grill on it cuts out,may be worth checking

    Dan

    in reply to: Your worst job. #176136
    Dansta
    Participant

    Re: Your worst job.

    Not the worst job by any means,but not nice.Called to see Bosch d/w not heating,whilst looking at m/c a dog runs through door barking and growling like mad,i s**t myself and told customer “will you please remove the dog”,heater was then orderd and Gegsy went back to fit,whilst in mid repair the dog came back for more and bit him on the arm,not one to back down Gegsy then punched the dog square in the jaw,he then ran off (the dog i mean).Customer promtly took the dog for a walk(or to the vets)

Viewing 10 posts - 31 through 40 (of 40 total)