Dansta

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 40 total)
  • Author
    Posts
  • in reply to: Your most used tool? #304154
    Dansta
    Participant

    Re: Your most used tool?

    My shotgun,its amazing how nice customers can be.

    in reply to: Servis W/D Door Seal M9503W/1 #304380
    Dansta
    Participant

    Re: Servis W/D Door Seal M9503W/1

    Forgot to say,be carefull when fitting the spout/rude bit! ,the plastic can crack.

    in reply to: Servis W/D Door Seal M9503W/1 #304379
    Dansta
    Participant

    Re: Servis W/D Door Seal M9503W/1

    yeap ive had the same problem mate,felt like crying after 30 mins of trying to fit a seal that was too small,I think the problem is that the old and new seals look the same but are different sizes,so take original seal with you(if customer cant use m/c)and match up,Dan

    in reply to: cda dishwashers #304386
    Dansta
    Participant

    Re: cda dishwashers

    CDA dishwashers are made by several manufactures so without a model you won’t get much feed-back,Dan

    in reply to: neff s5443x2gb/17 dishwasher #295463
    Dansta
    Participant

    Re: neff s5443x2gb/17 dishwasher

    I would still go with Module,doesnt always blow(visually).

    in reply to: neff s5443x2gb/17 dishwasher #295460
    Dansta
    Participant

    Re: neff s5443x2gb/17 dishwasher

    If it’s switching live and nuetral I would say the module is goosed.Dan

    in reply to: Any ideas? Candy cfmf236a fridge too cold, freezer ok! #295446
    Dansta
    Participant

    Re: Any ideas? Candy cfmf236a fridge too cold, freezer ok!

    Is it a “frost free” and does the freezer cool the fridge section via a fan? Sorry dont see many candy so dont recognise mod.Dan

    in reply to: Bosch WFO2864 #216131
    Dansta
    Participant

    Re: Bosch WFO2864

    Ive watched alot of the Bosch m/c’s jump from 7 mins to 1 min,I personly think the control module is allowing for an “out of balance load”.Probably wrong but thats what I tell customers.

    in reply to: Bosch WFO2460 flashing lights #277286
    Dansta
    Participant

    Re: Bosch WFO2460 flashing lights

    Is the door locking?

    in reply to: bosch kgn33v60gb/01 #277295
    Dansta
    Participant

    Re: bosch kgn33v60gb/01

    There’s a mod kit for these that needs fitting,module,deflecter plate(above evap) and depending on the FD and heater which goes up the drain tube in the freezer.

    in reply to: SMEG DWF409SS #277289
    Dansta
    Participant

    Re: SMEG DWF409SS

    Maybe heater relay on control module sticking.

    in reply to: Bosch EXXCEL washer dryer #277292
    Dansta
    Participant

    Re: Bosch EXXCEL washer dryer

    I think these have a condenser plate in the tank which if “gunged up” machine wont dry properly,might be worth asking the customer to do a few boil washes with a rag and detergent to try and flush through and also make sure shes only washing 1/2 a load,hope that helps,Dan

    in reply to: Bosch Dishwasher overfilling #276951
    Dansta
    Participant

    Re: Bosch Dishwasher overfilling

    Has this model not got a flow meter(impellor jug)? Might be worth checking the re-circ motor isnt seized have seen that cause same prob before.Dan

    in reply to: Bosch WAE243630GB/02 #277166
    Dansta
    Participant

    Re: Bosch WAE243630GB/02

    Might be worth looking in the user book to see if its got a child lock,Dan

    in reply to: Re Noisy Wash Pump/Motor Neff Integrated #276665
    Dansta
    Participant

    Re: Re Noisy Wash Pump/Motor Neff Integrated

    Dont forget the jubalee clip,the 1 on there is one shot.

Viewing 15 posts - 16 through 30 (of 40 total)