Dave_Conway

Forum Replies Created

Viewing 15 posts - 1,756 through 1,770 (of 12,426 total)
  • Author
    Posts
  • in reply to: Dishwasher suppressor!! #180799
    Dave_Conway
    Participant

    Re: Dishwasher suppressor!!

    A red herring more than likely, the dishwasher should still work with a blown suppressor just leave nice lines all over your TV screen etc 😉

    It may have damaged something else of course when it popped. When you say it won’t run/empty, what does it do exactly ?

    Dave.

    in reply to: Hotpoint dryer 9320 w drum belt replacement #180795
    Dave_Conway
    Participant

    Re: Hotpoint dryer 9320 w drum belt replacement

    quintain wrote:or any place i can see some nice pictures showing how to replace the belt.

    You won’t find any of those I doubt but it is a complete strip down as you’ve already discovered.

    Don’t forget to power off :zap:

    Dave.

    in reply to: LG motor #180791
    Dave_Conway
    Participant

    Re: LG motor

    It doesn’t actually say on the tect info, it does give this though:


    Take a reading between pins 1 ~ 2, 1 ~ 3 and 2 ~ 3 on the motor all should be around 6.5 ohms.

    If that’s OK then it’s the PCB.

    Dave.

    in reply to: HOTPOINT BS04P GRILL ELEMENT #180786
    Dave_Conway
    Participant

    Re: HOTPOINT BS04P GRILL ELEMENT

    It is obsolete from Merloni as well 🙁

    Have a look at a few Whirlpool single grill elements though, one of those should fit looking at the diagram 🙂

    Dave.

    in reply to: whirlpool akp951wh fan oven element #180778
    Dave_Conway
    Participant

    Re: whirlpool akp951wh fan oven element

    Looking at the picture of it on Connect’s site I reckon a Zanussi 2 turn will slip in there quite nicely 😉

    Dave.

    in reply to: TECNIK TKC1285 Grill Element #180752
    Dave_Conway
    Participant

    Re: TECNIK TKC1285 Grill Element

    Nope, it doesn’t 🙁

    Can you take a picture of the element and email it to me ?

    Dave.

    in reply to: Ocean APM6823 Intergrated Fridge/Freezer #180773
    Dave_Conway
    Participant

    Re: Ocean APM6823 Intergrated Fridge/Freezer

    It was originally supplied by MFI, probably part of a kitchen package. You’ll be hard pressed to find an exact replacement with the same sized doors.

    Odd that the exploding cans caused it though unless damage has been done to the internal pipework and the gas has escaped 😕

    It does sound like a system fault though, especially if the main motor (compressor) is running constantly.

    I would ask an engineer to call and assess to be honest as the system needs special equipment to test, try the repairs@ link below, that should show someone 🙂

    Dave.

    in reply to: whirlpool akp951wh fan oven element #180776
    Dave_Conway
    Participant

    Re: whirlpool akp951wh fan oven element

    4812 259 98465 is the part number at a quite shocking £58.53 ex VAT (list price) :eeek:

    Dave.

    in reply to: AEG Oven turning itself off #131623
    Dave_Conway
    Participant

    Re: AEG Oven turning itself off

    It’s a screwdriver job basically 🙂

    Don’t forget to power off when checking :zap:

    Dave.

    in reply to: Caple Range Cooker Model L8N IBNGVId2LMU #180769
    Dave_Conway
    Participant

    Re: Caple Range Cooker Model L8N IBNGVId2LMU

    On Connect’s site type “Caple hinge” in the search box, quite a few there with pictures.

    That may help.

    Dave.

    in reply to: TECNIK TKC1285 Grill Element #180750
    Dave_Conway
    Participant

    Re: TECNIK TKC1285 Grill Element

    Yep, it could be either.

    Any other numbers on the rating plate would help, Stoves will begin 05… and Rangemaster will have their usual style serial number.

    Dave.

    in reply to: portable air con #180771
    Dave_Conway
    Participant

    Re: portable air con

    A quick Google and it appears to be made by these:

    Premiair Ltd
    182 Luton Rd
    Dunstable
    Beds
    LU5 4LE

    Tel: 01582 601160
    Fax: 01582 601160

    Email: info@premiair.net

    Dave.

    in reply to: Indesit WE16 Drum Bearings #180739
    Dave_Conway
    Participant

    Re: Indesit WE16 Drum Bearings

    Not deliberately 😳 🙁

    I have inside information 😉 😆

    Dave.

    in reply to: Indesit WE16 Drum Bearings #180737
    Dave_Conway
    Participant

    Re: Indesit WE16 Drum Bearings

    Or order this Bearing Kit 😀

    Dave.

    in reply to: Comet comedians #180740
    Dave_Conway
    Participant

    Re: Comet comedians

    Nice install 😉

    Dave.

    Message edited by myself for not being PC enough 😆

Viewing 15 posts - 1,756 through 1,770 (of 12,426 total)