[Dave_Conway]

Re: MasterPart Home page wording

Blimey 😆

I’ve never noticed that before, I always go straight to the log in page. A tad strong I think, hopefully one of them will see this post tommorow and offer some comment 😉

Dave.

[Dave_Conway]

Re: AEG Oven turning itself off

Please don’t take this the wrong way but it is very evident that you have no idea of how to go about undertaking the repair yourself.

We can’t for legal and safety reasons tell you how to repair your cooker, only give general guidelines 😉

Please save yourself the effort and grief and ask an engineer to do it for you, the repairs@ link below should provide someone 😀

Dave.

[Dave_Conway]

Re: Subscribers spares deals

My most recent post wasn’t really about bulk buying to be honest, it was a general question about UKW selling spares to the trade.

I can easily offer next day delivery for daily orders if required 🙂

I’ll pass on the modules thanks 😉

Dave.

[Dave_Conway]

Re: beko dv5531 electric cooker

The “coating” is almost certainly burned on grease 😉

Seen it loads of times – customer complaint “my oven is peeling/smoking etc…”

The Sunday roast fat was spilled then 😆

Dave.

[Dave_Conway]

Re: Error E94 after E90 to zanussi wjs1265W

I have your email Baron, I’ll send some info for you 😉

Dave.

[Dave_Conway]

Re: Hotpoint brush life?

Or click HERE 😀

Genuine only 😉

Dave.

[Dave_Conway]

Re: dishwasher element

The heater is £40.19 inc VAT and carriage which I can get if required, just send an email to the address Iadom posted 🙂

But as mentioned, are you sure it’s failed ?

Your other thread asking how to fit it I have deleted as it is relevent to this topic. Basically we can’t tell you exactly how to do this for legal and safety reasons so if you’re unsure I would ask an engineer to be honest, try the repairs@ link below 🙂

Dave.

[Dave_Conway]

Re: TECNIK TKC1285 Grill Element

cookerfit wrote:If Dave can obtain Boro’s part cheaper then of course we will purchase from Dave

I can’t I’m afraid, special order everywhere and the “wholesalers” want retail price for it 😕

Dave.

[Dave_Conway]

Re: zanussi wdr1030 bearings & seal part no’s

Small bearing (6204ZZ) is 1245458003
Large bearing (6205ZZ I think) is 1245459001
Seal is 50095515008

Or just get a bearing kit, it’s the small shaft version that fits all the old 800 rpm machines 😉

Dave.

[Dave_Conway]

Re: zanuzzi iz16s washing machine

Pop up the PNC (product code) and I’ll send the diagnostics over 🙂 (confirm you’re on broadband as well ;))

Dave.

[Dave_Conway]

Re: zanussi fs1155w

Tech/diagnostics on the way Simon 🙂

It’s a hefty 4mb file so AOL may reject it, let me know if you don’t get it.

Dave.

[Dave_Conway]

Re: Smeg DI612 Error Code 2

Definitely E2 then 😉

Use the forum search for E2 and you’ll find it has been posted several (probably 100’s) of times with varying solutions 🙂

Dave.

[Dave_Conway]

Re: Error E94 after E90 to zanussi wjs1265W

E94 is a configuration error, the PCB isn’t set up correctly for the machine it’s fitted to or it’s not intended for that machine.

Dave.

[Dave_Conway]

Re: Dishwasher suppressor!!

The suppressor has no real bearing on the main functions no 🙂

It sounds like your pump is blocked again or failed. If you found the suppressor you’re you should find checking the pump easy enough 😉

Power off please :zap:

Dave.

[Dave_Conway]

Re: Smeg DI612 Error Code 2

Counting from the left (1 to 4 or 1 to 5) which lights are on or flashing Andy ?

Dave.

[Author]

Posts