[Dave_Conway]

Re: Stoves EC600 DLM

It is the correct element John 🙂

Dave.

[Dave_Conway]

machineman wrote:what sort of price are they Dave

About £25 🙂

Dave.

[Dave_Conway]

Re: Indesit WIL123S error code – door lock and LED1 delay ti

In theory LED1 falshing is F08 which is a heating fault but the programme should abort normally.

Check the next cycle during the main wash stage and see if the water is heating by feeling the door glass then let us know 🙂

Dave.

[Dave_Conway]

Re: Our network company shares

Someone needs to fill me in on this as the “project” was started whan I was away, the obvious all make sense but if there’s things I need to know (the shares thing) please let me know as I’m a little in the dark on this one.

Cheers.

Dave.

[Dave_Conway]

Re: Bosch oven motor

Yep, Masterpart’s BS14106 but they always seem to be out of stock 😕

Dave.

[Dave_Conway]

Re: ZANUSSI FJS1425W Hard to select programme

I don’t think you’ll need a new cable to be honest, normally a good clean up of the connections does the trick 🙂

Dave.

[Dave_Conway]

Re: Samsung B1215GWI/XEU a/w

Part number MF-B1215-01

Only Connect show it at £80 ex VAT special order..

🙂

Dave.

[Dave_Conway]

Re: Diplomat ADP8242

Dispensor solenoid possibly ? 🙂

Dave.

[Dave_Conway]

Re: hpt td no heat

Have you checked the front stat as well ?

If all those are OK it only leaves the timer really, part number is 1702492

Dave.

[Dave_Conway]

Re: hoover WDM130 01 soap disp problem.

Part number is now 97920946 which is what your customer should have recieved and it does require the top to be changed 😉

Dave.

[Dave_Conway]

Re: Electrolux Frost free – ER2866BN – Fridge warm after 1 m

I think the thermistors you’ve ordered will resolve it by the looks of this:

Lux wrote:NTC temperature sensors with a defect in the calibration (wrong resistance values) have been used for the
production of the Eurocombi appliances (Fuenmayor-Spain factory) with PNC 928405xxx from serial no.
307xxxxxx to 335xxxxxx.
The indicated NTC sensors were not faulty initially, but a defect in the isolation caused a wrong calibration after
some or many defrosting cycles.

Thermistor values:

°C……Ohm
10…..5348 ±0.6
5…….6818 ±0.4
0…….8758 ±0.4
-5……11337 ±0.4
-10….14795 ±0.6
-15….19475 ±0.7
-20….25862 ±0.8
-25….34666 ±0.9
-30….46921 ±1
-35….64161 ±1
-40….88577 ±1

Dave.

[Dave_Conway]

Re: module for HAIER HE 1400TXV

True 🙁

It’s a Haier so there’s more chance of Ken buying a round than getting any parts for it whatever it happens to be 😆

Dave.

[Dave_Conway]

Re: Candy CMD 136

3mb file on the way to your inbox Chris 😀

Dave.

[Dave_Conway]

Re: Hygena D/washer APL8224/3 L. Spray Arm Mounting

I’ve edited my post above showing the MFI list prices as a guide, the door seal is £17.91.

All ex VAT but take off about 15{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} discount 😀

Dave.

[Dave_Conway]

Re: ZANUSSI FJS1425W Hard to select programme

Check the ribbon cable between the selector and main PCB’s, that causes odd errors like this at times 🙂

Dave.

[Author]

Posts