Forum Replies Created
-
Posts
-
Re: ZANUSSI W/M ZWF 1217W ERROR CODE E90
It’s a common fault code to many Zanussi models Barry, the same basic PCB is used generically.
From memory it’s a config error.
Dave.
Re: ZANUSSI W/M ZWF 1217W ERROR CODE E90
Use the search Barry, it’s on here loads of times 🙂
http://www.ukwhitegoods.co.uk/modules.p … ile=search
Dave.
Re: hotpoint grill
If the oven is heating slowly it could also be the base element, the oven uses that one along with the outer of the upper element to heat.
Both will need checking for continuity to check which one has failed. Power off if checking yourself :zap: or check the repairs@ link below for an engineer if you’re unsure 🙂
Dave.
Re: Homark Oven User Manual
In that case it’s very old, can you describe the knob positions and any timer on the control panel, I’ll try and find something close.
Dave.
Re: Anguis in herba
Penguin45 wrote:Have pulled bgmike’s second post (full list of error codes for Hpt d/ws) as it was published in the public forum and pm’d him to apply for trade access.
He now has trade access 🙂
Dave.
Re: Welsh sheep – Isnt she beautiful
Penguin45 wrote:Wasn’t WVM that duffed up Lawrence’s van was it?
No, it was green 😆
Getting back the subject matter in hand (Matron ! 8O) the Ovis in the first photo is a beauty to behold……….
Eh Gegsy 😉 😆
Dave.
Re: Welsh sheep – Isnt she beautiful
Because Masham is in the Soviet Republic of Yorkshire perhaps ? 😀
Dave.
Re: Stoves grill door.
444445109 is a 720GDO but this model although listed has no spares info for it ontheir disk.
If you phone Stoves on 0151 432 7838 they should be able to provide up to date information on this for you 🙂
Dave.
Re: cooker regs
Assuming it’s a 2 screw fixing as opposed to a threaded shaft, you should be able to use a 41ERI01C1 (Hotpoint part number 6202946) then use this cross ref guide for the terminals positions:
http://www.ukwhitegoods.co.uk/modules.p … ic&t=13199
Dave.
Re: stoves part no req
There’s only a generic diagram for this model so it’s not clear exactly how they are mounted but here are the part numbers and descriptions from the list:
Top oven thermostat – 082399200
Thermostat (assume the main oven) – 082359300
Top oven switch – 082399100Dave.
Re: Homark Oven User Manual
Could you check the model number ACS76 – 02-7600 isn’t long enough, there’s two more number (probably on the end after the zeros).
Dave.
