Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Bearing Replacement -Zanussi FLA 1001W
sqashman wrote:Again -thanks to Dave Conway et al – I will be back when something else goes wrong
You’re welcome 😀Thanks for coming back and letting us know all went well for you.
Dave.
Dave_Conway
ParticipantRe: Belling 902 / 903 ignition
New part number 082607805 at £53.32 inc VAT plus carriage which is a little pricey I think.
It’s actually manufactured by Creda but I can’t cross reference this one, perhaps Creda/Cannon never used this version under their own brand name 😕
An email to spares@ukwhitegoods.co.uk please if required (attach a photo of it if possible, I may be able to source a campatible unit) 🙂
Dave.
Dave_Conway
ParticipantRe: New spring needed for door
I’ll answer your email for the same in the morning Mike 🙂
Dave.
Dave_Conway
ParticipantRe: Homark Maunual for 02 700301
Done 8)
Dave_Conway
ParticipantRe: Zanussi main oven fan motor FM9232
Goatboy wrote:connect wanna charge me £39 for it 🙁
👿
You want me to order for you ?
I guess with carriage it will be £30 ex VAT ?
Goatboy wrote:Ps. Why are you still working, go and have a :beer:
Too early GB and I’m normally working even if I do have a beer 😉
Dave.
Dave_Conway
ParticipantRe: Diplomat ADP 8132 Intergrated D/W
rocker wrote:dont now how to reset timer ect..
It’s a Smeg:
http://www.ukwhitegoods.co.uk/modules.p … ic&t=12687
The reset is there 🙂
Dave
Dave_Conway
ParticipantRe: Zanussi main oven fan motor FM9232
Goatboy wrote:I just hope it’s not the ‘ventilator’ – 50214260007 – £150 👿
It is but it supersedes to 50218580004 at £25 odd from Connect
Dave
April 28, 2006 at 3:23 pm in reply to: fitting an element to 4638 tricity bendix sovereign oven #174432Dave_Conway
ParticipantRe: fitting an element to 4638 tricity bendix sovereign oven
Are you refering to the fan element in the main oven ?
Dave.
Dave_Conway
ParticipantRe: EL1000 cooker knob
There has to be more numbers on this oven/cooker, all appliances have a rating plate (a legal requirement) with the voltages etc on, this is where the model number will be more than likely.
It’s also not clear what type of cooking appliance this is, the EL1000 part would indicate a 1000mm range cooker but that may not be the case. If it’s an integrated (built in) oven then the hob would be a seperate appliance and this wouldn’t be a duel fuel appliance.
Could an owner confirm please:
Type of appliance
The full model number from the rating plate, if built in it may need to be removed from the housing to find this or possibly on the rear somewhere if it’s freestanding.
Thanks.Dave.
Dave_Conway
ParticipantRe: DIPLOMAT D/WASHER ADP8242 NR 018460402
That’s not a bad price really to be honest, I can sort one for £80 ex VAT (plus carriage) if you like but it’s not that much less 🙂
Dave.
Dave_Conway
ParticipantRe: servis manuals samsung
Open a spares account with Samsung Tony 😉
Dave.
Dave_Conway
ParticipantRe: WHIRLPOOL AMERICAN F/F
The front PCB is 4812 44079132 at £82.85 ex VAT list.
The rear PCB is 481221778172 but no pricing information on SIOS 😕
You can phone Whirlpool on 0208 649 5450 for the price though.
Dave.
Dave_Conway
ParticipantRe: servis manuals samsung
You have a PM Steve 😉
Dave.
Dave_Conway
ParticipantRe: NEFF DBIO
NF1417 will fit but quite often the runners are wrong if you need those it would be worth ordering the genuine ones seperately 🙂
481827 is a pair of hinges
Dave.
Dave_Conway
ParticipantRe: Gallery comments
It was to do with the problem Andy Trigg was having changing the time zone:
http://www.ukwhitegoods.co.uk/modules.p … ic&t=13936
Spam stopper rules were a little “too harsh”, now resolved 😉
Dave.
-
AuthorPosts
