Forum Replies Created
-
Posts
-
Re: cookers appliances delta 900[bernstein]
Part number is 20114550 (CATA manufauctured whoever they are 😕 )
Connect list it for a Baumatic hood also at around £70 😯
Dave.
Re: prima lpr600 beeping, but not starting – please help!
4 flashes or F4 is a no drain error. Check for blockages where the waste hose joins the sink trap (if it does) for a starting point 🙂
Dave.
Re: How much do you think a Hoover 3236 washer cost in 70’s?
This is quite interesting:
http://www.thecatalogshop.co.uk/catalog … s-1970.php
🙂
Re: Beko WMA1512
In a word Greg, Arcelik ! 😆
Same as the Hoover Performa one’s normally.
CBN9210 from Connect and in this thread from Homespare:
http://www.ukwhitegoods.co.uk/modules.p … pic&t=6514
Dave.
Re: Tki TH1001 SBIO
Teka ?
On Connect – Oven shelf- 435mm x 310mm at £18 odd trade, special order.
A universal one would do I would think 🙂
Dave.
Re: Belling Synergie
Yes, Belling/Stoves/GDA are a PITA at the moment for spares, coupled with a poor backorder system from Masterpart ( a subject unto itself which may well emmerge shortly if I don’t get any answers ! 👿 )
Dave.
Re: Teba Grill and Proline Fan Elements
Keith, please describe the element as above 😉
Centre/right hand terminals/single/double etc
Dave.
Re: Daewoo fridge call
kheath wrote:Now why couldn’t Gary answer the same?????
Because he’s an arrogant prick ? 😉
Dave.
Re: Arrow built under cooker door problems
If there’s no clip which most Teba/Arrow ovens didn’t have, you need to hold the hinges down pushing against the spring while you fit the hinge back in I’m afraid. Both at the same time as well 🙁
Dave.
Re: Hoover 160E PCB
For the UK market there are:
SE160E, H160E, HF160E, HF7-160E and HC6-160E and they’re all different by the looks of it 🙁
Dave.
Re: Diplomat ADP 8902 slimline integrated (the little beggar
To resolve it the base needs to be emptied assuming there isn’t a leak elswhere causing it.
It would need to be pulled from the housing and tilted allowing the water to run out (get the towels handy ;))
If you do need an engineer, check the repairs@ link below 🙂
Dave.
