Dave_Conway

Forum Replies Created

Viewing 15 posts - 2,896 through 2,910 (of 12,426 total)
  • Author
    Posts
  • in reply to: Diplomat (Whirlpool) ADP 8322 askoll circ pump #172082
    Dave_Conway
    Participant

    Re: Diplomat (Whirlpool) ADP 8322 askoll circ pump

    No, only the replacement but it’s dead easy and takes hardly any longer than fitting the askoll type 😀

    Dave.

    in reply to: Arrow built under cooker door problems #172093
    Dave_Conway
    Participant

    Re: Arrow built under cooker door problems

    Have you checked the two short videos onthe Bosch website from the link here:

    http://www.ukwhitegoods.co.uk/modules.p … pic&t=3771

    Those will help 😉

    Dave.

    in reply to: Candy Aquaviva 1000 hot / cold problem. #172028
    Dave_Conway
    Participant

    Re: Candy Aquaviva 1000 hot / cold problem.

    Electronically controlled machine then with electronic heat control also.

    One for an engineer but as GB says, it could be one of a few things.

    Check the repairs@ link below you can discuss likely costs directly that way 🙂

    Dave.

    Dave_Conway
    Participant

    Re: Diplomat ADP 8902 slimline integrated (the little beggar

    The latter is error E1 which means the base has flooded from the leak no doubt. The previous faul was a time out on drain error which you’ve probably solved by the sound of it 🙂

    Dave.

    in reply to: Daewoo fridge call #172045
    Dave_Conway
    Participant

    Re: Daewoo fridge call

    Has anyone else had this dumped on them without being asked beforehand ?

    Dave.

    in reply to: Candy Aquaviva 1000 hot / cold problem. #172026
    Dave_Conway
    Participant

    Re: Candy Aquaviva 1000 hot / cold problem.

    Could you post the full model number please, preferably the long one beggining 3 from the label inside the door aperture.

    Thanks.

    Dave.

    in reply to: Belling ID602 DW Pump? #172009
    Dave_Conway
    Participant

    Re: Belling ID602/2 DW Pump?

    Kirk wrote:is it inter changeable?

    Yep, that’s the replacement motor as supplied by Brandt, they describe it as a “kit” so there may well be some mounting changes.

    Dave.

    in reply to: Whirlpool 854254015810 #172032
    Dave_Conway
    Participant

    Re: Whirlpool 854254015810

    4812 418 68149 🙂

    Dave.

    in reply to: Teba Grill and Proline Fan Elements #172002
    Dave_Conway
    Participant

    Re: Teba Grill and Proline Fan Elements

    10110407 was the Teba part number for the grill element but you won’t find any in the UK (not genuine anyway) as they have deceased here 😉

    I have plenty of the fan elements and one grill element at the moment but I can get more if required.

    Dave.

    in reply to: For the record #146485
    Dave_Conway
    Participant

    Re: For the record

    Penguin45 wrote:Anybody seen him?

    Nope 😕

    in reply to: Teba Grill and Proline Fan Elements #172000
    Dave_Conway
    Participant

    Re: Teba Grill and Proline Fan Elements

    The Teba you’ll have to describe as I can’t cross ref the old part numbers, there are basically only four:

    Central terminals, single or double and right hand terminals single or double.

    The Proline is Brandt part number 75X3520 or Qualtex ELE4503, Masterpart BR14100

    If you get stuck, let me know (ignore the shop@ public prices ;))

    Dave.

    in reply to: Belling ID602 DW Pump? #172006
    Dave_Conway
    Participant

    Re: Belling ID602 DW Pump?

    Looking at the wiring diagram the motor is controlled by the timer but I’ve never know one fail, possibly the pressure switch ?

    I would suspect the motor itself as they fail regularly, part number 32X1617

    Dave.

    in reply to: New World oven hinges #171933
    Dave_Conway
    Participant

    Re: New World oven hinges

    Part number 032494500 close Tony ?

    Picture on Connect’s site although it doesn’t show the black plastic foot thing I’m sure it comes with it 🙂

    Dave.

    in reply to: Hoover Drier D6418 #171989
    Dave_Conway
    Participant

    Re: Hoover Drier D6418

    1910J3 is correct, the centre mount motor refers the Creda models it also fits.

    You can still get the heaters, HV3430 from Masterpart 🙂

    Dave.

    in reply to: Teba Grill and Proline Fan Elements #171998
    Dave_Conway
    Participant

    Re: Teba Grill and Proline Fan Elements

    Teba grill elements are held by Qualtex and both myself and Bryan (R600A) keep them.

    Proline vary depending on the manufacturer as it’s Comet’s own brand name, most are Brandt for the early versions, a few Terim :eeek: and some Delonghi 🙂

    Dave.

Viewing 15 posts - 2,896 through 2,910 (of 12,426 total)