Forum Replies Created
-
Posts
-
Re: CLASSIC HYDRO 750
The company are or were called Classic Glass on 01889 272300
These guys also seem to sell spares for them:
Dave.
Re: Hoover HD96M dishwasher motor
41001307 £167.13 ex VAT is Hoover’s list price :eeek:
Connect show it for around £40 trade – work that one out :con:
Dave.
Re: Hygena built in oven AHY 4120
Part number is OROTCTLA (which isn’t really a number :))
£15.99 ex VAT list from MFI on 08457 959722
Dave.
Re: Help Please!
goosegreen wrote:Could worn brushes have damaged the pcb rather than the loom?
It’s happened to me more than once 🙁
Dave.
Re: AEG Lavamat74335 W/Mach. E34 Fault
There are two pressure devices according to the diagram, one is the analogic one and the other a normal one.
The analogic seem pretty reliable on the whole.
Dave.
Re: A.E.G. frost free fridge freezer santo
They’re about £8 each list, you can get them Electrolux Distriparts on 01325 302464 🙂
Dave.
Re: Hostess Trolley Pyrex Dish.
You can still get these as a set of three for around £50 for the set.
If you get stcuk, I can order for you, spares@ukwhitegoods.co.uk 🙂
Dave.
Re: Whirlpool drain pump runs continuously
No, that system was only ever used on some old Electrolux dishwashers to my knowledge.
Dave.
Re: Problem with repairer
Something’s been done anyway 😀
After all this time and without any explanation for the delay they rang today and said they are coming to fit the part next Wednesday! If you have triggered this then I am very grateful. Although I can understand if the part was difficult to source,I do think from 27th January to 9th March is an unreasonable amount of time to be left without any communication from them.
Who did what please as it wasn’t me directly ?
Dave.
Re: smeg dwi701e does not finish its cycle
You replied to the other thread regarding resetting this dishwasher thanking me after posting this one, so I assumed it worked and all is now OK 🙂
Dave.
Re: smeg dwi701e does not finish its cycle
Presumably the reset worked from your other thread then ? 🙂
Dave.
Re: Washer/Dryer, clothes warm but still damp
Possibly blocked with fluff in the fan housing or associated areas, no filter as such though.
Model number please for further help, Turbodry 1200 is a generic term. It should be inside the door normally.
Power off if you are to investigate further :zap: or check the repairs@ link below for pro help 🙂
Dave.
Re: whirlpool AWM 5125/5
Open circuit pump or valve is likely as well, also double check the carbon brushes as they can cause odd faults on these when fairly well worn.
Dave.
