Dave_Conway

Forum Replies Created

Viewing 15 posts - 3,361 through 3,375 (of 12,426 total)
  • Author
    Posts
  • in reply to: ISE Stock arrival to agents #167164
    Dave_Conway
    Participant

    Re: ISE Stock arrival to agents

    Goatboy wrote:I’ve just sold another too 🙂

    Is that another 2 or 1 extra ? 😀

    Dave.

    in reply to: Baumatic Single Oven #168914
    Dave_Conway
    Participant

    Re: Baumatic Single Oven

    Someone else posted that yesterday somewhere didn’t they ?

    Baumatic’s technical supoort is poor to non-existant Rob so I doubt anyone will know to be honest 🙁

    Dave.

    in reply to: samsung Q1235s Error codes? #126631
    Dave_Conway
    Participant

    Re: samsung Q1235s Error codes?

    I may be able to help, if you could reply to my email asking for the full model number please I will check for you 😀

    Dave.

    in reply to: Ikea/Whirlpool dishwasher 60cm wide and integrated #168833
    Dave_Conway
    Participant

    Re: Ikea/Whirlpool dishwasher 60cm wide and integrated

    It’s probably the flow meter in that case, if you have a read of this thread:

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=12186

    That’s basically the same dishwasher 🙂

    Power off please if continuing yourself :zap: or check the repairs@ link below if you need pro help.

    Dave.

    in reply to: nilfisk spares…..gd930 #168871
    Dave_Conway
    Participant

    Re: nilfisk spares…..gd930

    Washvac were the main distributer, no idea if they still are though.

    http://www.partscenter.co.uk

    Dave.

    in reply to: Belling format 6060 #168872
    Dave_Conway
    Participant

    Re: Belling format 6060

    Lamp – Masterpart’s UN41103
    The starter is 20829 but it’s a bit pricey, you can use a standard flourescent starter (4-65W one will do) for about 50p

    Dave.

    in reply to: AEG Oven turning itself off #131619
    Dave_Conway
    Participant

    Re: AEG Oven turning itself off

    turnerrf wrote:Can you confirm that the part number required will be 8996619267611 as advised to the others (albeit different models).

    You oven does have this part fitted so it is the likely cause 🙂

    turnerrf wrote:Can you also advise if this requires an engineer or is it something I could do myself?

    Only you can answer that one really 😉

    If you’re unsure, check the repairs@ link below for an engineer.

    turnerrf wrote:As an aside someone mentioned to me the other day that 1 or 2 year warranties is illegal and in fact manuafactuers of such appliances are leaglly obliged to provide a 3 year warranty as standard. is this correct or just wishful thinking?

    Wishful thinking IMO 😀

    Dave.

    in reply to: Hoover HND 315 #168842
    Dave_Conway
    Participant

    Re: Hoover HND 315

    Basket wheel – 91601039
    Wheel axle – 92608637
    Plate holder – 41011331

    It only shows one plate holder so I’m not sure how many there are meant to be 😕

    Dave.

    in reply to: Hoover HW 160 washer dryer #168853
    Dave_Conway
    Participant

    Re: Hoover HW 160 washer dryer

    There is no alternative I’m afraid Walnut, just the genuine one.

    Dave.

    in reply to: Hoover HW 160 washer dryer #168849
    Dave_Conway
    Participant

    Re: Hoover HW 160 washer dryer

    :wave:

    in reply to: Hoover HND 315 #168840
    Dave_Conway
    Participant

    Re: Hoover HND 315

    I’m looking at it right now Chris, which part number(s) do you need ?

    You have about 10 mintes to reply as I have to go visit the Mother In law 🙁

    ….on second thoughts, take as long as you like 😆

    Dave.

    in reply to: Hoover HW 160 washer dryer #168847
    Dave_Conway
    Participant

    Re: Hoover HW 160 washer dryer

    91620118 🙂

    Dave.

    in reply to: hotpoint 9410 #168824
    Dave_Conway
    Participant

    Re: hotpoint 9410

    Unless someone here has one on the shelf, i doubt you will to be honest.

    Obsolete now and I’ve checked all the usual suppliers and no stock anywhere 🙁

    Dave.

    in reply to: belling fan oven problems #117119
    Dave_Conway
    Participant

    Re: belling fan oven problems

    CraigJ wrote:We’re near Boston in Lincolnshire, postcode is PE22 0EB…anyone?

    Have you tried the repairs@ link (below) ?

    You should find an Independent engineer on there who can help 🙂

    Dave.

    in reply to: Faulty Hygena AHY 8122 #168775
    Dave_Conway
    Participant

    Re: Faulty Hygena AHY 8122

    It sounds like a leak in to the base causing the anti-flood device to activate, try leaning the dishwasher (with towels handy ;)) and see if any water runs out.

    It may work once the base is cleared of water but the underlying fault will need to be rectified.

    Power of please if you go any further :zap: or check the repairs@ link below if you need an engineer 🙂

    Dave.

Viewing 15 posts - 3,361 through 3,375 (of 12,426 total)