Dave_Conway

Forum Replies Created

Viewing 15 posts - 3,436 through 3,450 (of 12,426 total)
1 2 3 … 229 230 231 … 827 828 829
  • Author
    Posts
  • March 4, 2006 at 11:00 pm in reply to: Suitable material ? #167539
    Dave_Conway
    Participant

    Re: Suitable material ?

    It’s piracy pure and simple, I saw it earlier and hopefully it will just drop off but in the classified forum it won’t as it hardly gets that much use.

    Just replied 🙂

    Dave.

    March 4, 2006 at 10:46 pm in reply to: ASEA Cylinder 1502 #167538
    Dave_Conway
    Participant

    Re: ASEA Cylinder 1502

    Asko and Asea are (or were) one and the same company. Most spares are still available, I assume by shelf you mean the upper basket ?

    This isn’t listed any longer but will probably still be OK, if you drop me an email to spares@ukwhitegoods.co.uk I can place an enquiry for you 🙂

    Dave.

    March 4, 2006 at 3:05 pm in reply to: ariston dispensor #167524
    Dave_Conway
    Participant

    Re: ariston dispensor

    streetlighter wrote:model is LU 62 IX UK which I cant find.

    That’s because it’s an LV62IXUK 😉

    Part number C00075468 🙂

    Dave.

    March 4, 2006 at 11:42 am in reply to: Creda S150E W #167519
    Dave_Conway
    Participant

    Re: Creda S150E W

    If it’s the furthest right on the control panel then it’s 6201717, both front and rear come together 🙂

    Dave.

    March 4, 2006 at 11:38 am in reply to: parts availabilty and prices please? #167457
    Dave_Conway
    Participant

    Re: parts availabilty and prices please?

    The FFD part number(s) are incorrect Tell as is the Serial number, Leisure serials start at 5 upwards.

    Dave.

    March 4, 2006 at 11:32 am in reply to: Diplomat ADP8112 #167461
    Dave_Conway
    Participant

    Re: Diplomat ADP8112

    It’s right next to the element with a red button, just push it 😉

    Power off please :zap:

    If you’re unsure, check the repairs@ link below 🙂

    Dave.

    March 4, 2006 at 11:31 am in reply to: electric whirlpool oven error #167502
    Dave_Conway
    Participant

    Re: electric whirlpool oven error

    Can you post the model number and the product code beggining 85?????? please, GBS277 isn’t a correct model.

    Dave.

    March 4, 2006 at 11:28 am in reply to: AEG LAVAMAT W1020W W/M #167512
    Dave_Conway
    Participant

    Re: AEG LAVAMAT W1020W W/M

    1100990439 – £105.48 ex VAT list 😯

    Dave.

    March 3, 2006 at 5:25 pm in reply to: scandinova fridge problem #167445
    Dave_Conway
    Participant

    Re: scandinova fridge problem

    The fridge thermostat has failed by the sound of it, pretty straightforward repair and not too costly.

    Check repairs@ below for an engineer near you 🙂

    Dave.

    March 3, 2006 at 5:22 pm in reply to: Unknown D/W #167422
    Dave_Conway
    Participant

    Re: Unknown D/W

    481228268035 about £15 trade.

    It’s underneath at the front, fits in to the sump and plugs in to the PCB.

    Dave.

    March 3, 2006 at 4:56 pm in reply to: AEG 72630 OKO LAVAMAT noisy spinning #167409
    Dave_Conway
    Participant

    Re: AEG 72630 OKO LAVAMAT noisy spinning

    Part number 1249691104 at £10.62 inc vat plus carriage.

    An email to spares@ukwhitegoods.co.uk please if you’d like one 🙂

    Dave.

    March 3, 2006 at 3:12 pm in reply to: Unknown D/W #167418
    Dave_Conway
    Participant

    Re: Unknown D/W

    :wave:

    March 3, 2006 at 3:06 pm in reply to: Unknown D/W #167416
    Dave_Conway
    Participant

    Re: Unknown D/W

    It’s a Whirlpool, same codes as in the known error codes thread 🙂

    Dave.

    March 3, 2006 at 3:05 pm in reply to: hotpoint CDT00 Tumble Drier #167396
    Dave_Conway
    Participant

    Re: hotpoint CDT00 Tumble Drier

    pincher wrote:I take it the capacitor is the cylindrical object near to the motor

    That’s the one, you can only check them accurately with a proper capicitance meter but they are pretty cheap, check the rating on it in UF value, a universal type should do the trick.

    http://www.ukwhitegoods.co.uk/modules.p … Path=58_91

    Dave.

    March 3, 2006 at 3:03 pm in reply to: AEG 72630 OKO LAVAMAT noisy spinning #167407
    Dave_Conway
    Participant

    Re: AEG 72630 OKO LAVAMAT noisy spinning

    It’s unusual for a pulley to fail that quickly, overloading is the obvious reason to be honest.

    Can you post the PNC (product code) to identify the pulley (ref your other post) please.

    Dave.

  • Author
    Posts
Viewing 15 posts - 3,436 through 3,450 (of 12,426 total)
1 2 3 … 229 230 231 … 827 828 829