Dave_Conway

Forum Replies Created

Viewing 15 posts - 3,496 through 3,510 (of 12,426 total)
  • Author
    Posts
  • in reply to: lg gr399sq fridge freezer #166927
    Dave_Conway
    Participant

    Re: lg gr399sq fridge freezer

    johnrach1 wrote:being female, I only know about kittens and embroidery!!!!

    :rotl:

    in reply to: LP Conversion to NG #166928
    Dave_Conway
    Participant

    Re: LP Conversion to NG

    We’ll need a model to check the availablity of any conversion parts for you please 🙂

    Bear in mind, this must legally only be carried out by a Corgi registered engineer.

    Dave.

    in reply to: lg gr399sq fridge freezer #166925
    Dave_Conway
    Participant

    Re: lg gr399sq fridge freezer

    It sounds like you may have an over-icing problem in the freezer restricting the air flow to the fridge.

    Try a total defrost for 24 hours and see if that helps, it may not of course rectify the underlying cause which may need an engineer to diagnose for you..

    If you need an engineer, check the repairs@ link below 🙂

    Dave.

    in reply to: Baumatic Spares #133772
    Dave_Conway
    Participant

    Re: Baumatic Spares

    They do have one spares distributor but they are wholly reliant on Baumatic themselves, so back to Baumatic I’m afraid as they are the only place to get spares for their own products ultimately 🙁

    Dave.

    in reply to: Top viewers #117158
    Dave_Conway
    Participant

    Re: Top viewers

    Alex wrote:How sad is this ?

    Very, but here’s the latest as requested by some grey bearded Scotsman at the weekend but then I did knick a couple of fags so….. 😆

    1 dave_conway 227892
    2 kwatt 158208
    3 penguin45 138364
    4 martin 91432
    5 bryan 65447
    6 robdray 57213
    7 johnmac11 50756
    8 don 48579
    9 iadom 42786
    10 Simon46 38774

    Dave.

    in reply to: Culprit found for Fire Alarm at Hotel #166764
    Dave_Conway
    Participant

    Re: Culprit found for Fire Alarm at Hotel

    :rotl:

    in reply to: Culprit found for Fire Alarm at Hotel #166762
    Dave_Conway
    Participant

    Re: Culprit found for Fire Alarm at Hotel

    Penguin45 wrote:If we go there again, I’m not.

    :wave:

    We won’t be 😀

    Dave.

    in reply to: Culprit found for Fire Alarm at Hotel #166761
    Dave_Conway
    Participant

    Re: Culprit found for Fire Alarm at Hotel

    eastlmark wrote:Yeah, the UKW hardcore who it seems to me were oblivious to the fact that the alarm was sounding at all.

    We (or I was anyway) quite aware of the alarm sounding off but as we were in full view of the various (if sparce) hotel staff members not showing any signs of major panic it was quite evident there was no real cause for concern 😉

    I use the same philosophy on planes, watch the “experienced” staff’s faces, if they show signs of nappy requirement……… 😯

    Dave.

    in reply to: Belling 6060c cooling fan no go #166835
    Dave_Conway
    Participant

    Re: Belling 6060c cooling fan no go

    Check the huge multi-plug which connects the control panel to the rest of the cooker, prone to frying themselves 😉

    I can’t for the life of me remember which side panel to remove to access it though 😕

    Dave.

    in reply to: Ariston OKRF3100l F/F #166833
    Dave_Conway
    Participant

    Re: Ariston OKRF3100l F/F

    I think this may be the same case as a lot of manufacturers where the seal is shown as a spare part but in reality cannot be fitted, only the whole door is the solution in those cases 🙁

    Dave.

    in reply to: Connections DVD #166821
    Dave_Conway
    Participant

    Re: Connections DVD

    There is no fix, the DVD will expire and the website will have to be used.

    Connect flatly refused to reinstate mine as I don’t use it to order from, it times out if you only use it as a reference and use the website as your ordering facilty.

    Arrogance as per……. 👿

    Dave.

    in reply to: Zanussi F/F – fridge not cooling #166898
    Dave_Conway
    Participant

    Re: Zanussi F/F – fridge not cooling

    Hi staffssue,

    It seems that there are many issues with the ZX range according to the huge amounts of posts we get regarding them in the last few months.

    An engineer is nearly always required to be honest due to their complexity, check the repairs@ link below 🙂

    Dave.

    in reply to: Hotpoint Mistral Frost Free Problem #166896
    Dave_Conway
    Participant

    Re: Hotpoint Mistral Frost Free Problem

    aero wrote:failing that do you know of any good engineers in the Romford area?

    Have you checked the repairs@ link (see below) ? 😀

    Dave.

    in reply to: Servis Platinum m4608AL #166779
    Dave_Conway
    Participant

    Re: Servis Platinum m4608AL

    Did you try repairs@ ?

    If no-one is listed, pop up the first part of your postcode, I have a list of repairers 🙂

    Dave.

    in reply to: Ariston Hood Motor #166805
    Dave_Conway
    Participant

    Re: Ariston Hood Motor

    Try part number C00085197 which is just the motor, the other part number includes the housing/fans etc 🙂

    Still has a list price of £90 odd though 🙁

    Dave.

Viewing 15 posts - 3,496 through 3,510 (of 12,426 total)