Forum Replies Created
-
Posts
-
Re: Hoover HF130E a/w
I dunno, but I know a nice website that may do 😉
Remind me in the am, adobe acrobat seems to have a distinct dislike for this pc :haier:
Dave.
Re: Homark
From what I can gather from the emails today from AIS, they will be responsible for the “wet” products and EAC for the cooking.
No mention of any rate change though when AIS handle the calls, which started today according to the aforementioned emails, thanks for the prior warning 😕
Dave.
Re: Homark Oven not regulating the heat-can I fix it?
Almost certainly the thermostat by the sound of it, without the model pricing is difficult but I would take a stab at between £60 and £80 for a completed repair.
New oven would be anywhere between £200 and £400 depending on brand etc.
Either way, I would always recommend an engineer attends to the repair or installation for you.
Dave.
Re: brandt motor carbons
Not these by any chance is it ?
http://shop.ukwhitegoods.co.uk/Washing+ … ushes.html
You can get them via Qualtex using the shop part number.
Dave.
Re: Ocean APM6825 from MFI
Hi All,
I to own am APM6825 ocean/brandt fridge freezer.
The problem is similar to those mentioned but not quite the same.
Here goes: The fridge appears to be warm at the bottom continuously.
I had a problem with the freezer and found the exchanger was iced up and the drain blocked. I followed the instructions posted here, took the panel off unblocked the hole and defrosted the exchanger – all apears fine with the freezer.Does any one know how I can stop the auto-defrost in the fridge ?
Am I looking at a pcb fault ?
More than likely yes, it may also be the defrost heater.
I’ve done this as a quote as I have deleted the message due to the user name you have used.
Dave.
Re: Bosch Maxx WFL2260 Not pumping out
Very likely the pump itself has failed if there is definitely no blockages or objects in there.
You should be able to get at it from underneath, please pull the plug 1st though :zap:
To identify the pump, I’ll need the full model number from inside the door, it will begin with WFL2260 but end with GB/??
Dave.
Re: White Knight 767 says bottle’s full (it isn’t!)
It’s probably worth a look at as it’s a condenser and may be something quie simple.
White Knight on the whole are pretty good, better than some anyway 😉
Have a look at The Directories and Repairs@
Dave.
Re: Blomberg distributor
Blomberg is Comet’s own brand name.
If you can post the model number and the part you need we may be able to help, otherwise, it’s back to Comet.
Dave.
Re: A Word Of Thanks…
I’d also like to add my thanks to the guys that weren’t at the meetings for keeping the public informed and answering posts..
Cheers guys 😀
The minutes will be done tonight as well so they should be available for download in the morning.
Dave.
Re: Ariston margherita 2000 AWD12…
Mark, if you go to the repairs@ module here:
http://www.ukwhitegoods.co.uk/search/fi … ineer.html
and enter your details, there is someone there who can sort for you.
Dave.
Re: SMEG FAB30A Cracking
Generally no, but the one major problem I find is the pure weight of the 4 pint milk/fruit juice cartons which is the main cause, and one which pretty much all fridges aren’t designed to handle.
Dave.
Re: Repairs@ Module
You’re welcome Simon, it’s actually quite easy for us to add you guys now the software is in place and once you’ve done it a few times…..
Probably about the same time as it takes to fill out the two forms 😉 😆
Dave.
Re: help with non gen lux v/c belt
I would imagine so, everyone else does Simon.
Masterpart have access to the trade forums and will no doubt reply directly when they read this.
Dave.
