Dave_Conway

Forum Replies Created

Viewing 15 posts - 961 through 975 (of 12,426 total)
  • Author
    Posts
  • in reply to: Funding UKW #186748
    Dave_Conway
    Participant

    Re: Funding UKW

    It’s something I’ve thought of quite a bit to be honest…

    Being the type of person who seeks free/cheap info/software etc from wherever, there’s 1000’s of sites that do exactly this.

    Personally I don’t have an issue with it as purely a donation but we would have to feed some of it back to the moderators I think as they “cover our arses” a hell of a lot of the time 🙂

    The Paypal thing is easily done.

    Dunno……..

    Ken ?

    Dave.

    in reply to: UKW Charity? #180279
    Dave_Conway
    Participant

    Re: UKW Charity?

    On the same subject (Xmas bash)…

    Is anyone passing Glasgow airport on Friday 1st about 8.30 PM (that’s when we land) ?

    If not, I’ll grab a hire car 🙂

    Cheers

    Dave.

    in reply to: Baumatic BT904 built in double oven #123257
    Dave_Conway
    Participant

    Re: Baumatic BT904 built in double oven

    I had a better idea as this seems a fairly common part:

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=626

    Added to the online shop 😀

    Dave.

    in reply to: Baumatic BT904 built in double oven #123256
    Dave_Conway
    Participant

    Re: Baumatic BT904 built in double oven

    Normally closed thermostat then 😉 It’s priced at £14.52 inc everything which I can order for you.

    An email to spares@ukwhitegoods.co.uk please if you’d like one 🙂

    Dave.

    Dave_Conway
    Participant

    Re: Beko WMA510W stuck in ‘Wash Spin/End’ mode. Gonna get ki

    Wozza2006 wrote:would this work on my model?.

    It’s worth a try I guess 🙂

    Apart from that, I doubt it’s anything you have done to be honest, just a failure of a component, get your Dad to check the repairs@ link below for an engineer 😀

    Dave.

    in reply to: Blomberg 1315 AAB Washing Machine #186735
    Dave_Conway
    Participant

    Re: Blomberg 1315 AAB Washing Machine

    mallygee wrote:What should I do next? 😯 .

    Check the carbon brushes (with the power off :zap:) 😉

    Dave.

    in reply to: UKW Charity? #180278
    Dave_Conway
    Participant

    Re: UKW Charity?

    kheath wrote:just had a fitting on me kilt and me willeys too long………

    I think it’s far more likely the kilt is a very short one 😉 😆

    Dave.

    in reply to: Ariston LI62 Dishwasher Problems… #186682
    Dave_Conway
    Participant

    Re: Ariston LI62 Dishwasher Problems…

    bigdavefleming wrote:There doesn’t appear to be any blockages in the filters, etc.

    Have you checked all the holes in both spray arms as well ? 😉

    Dave.

    in reply to: Pattern Armature 161747B #186679
    Dave_Conway
    Participant

    Re: Patern Armature 161747B

    I’ve got 6 of the babies here if you’re desperate Goose 🙂

    Dave.

    in reply to: Baumatic BT904 built in double oven #123254
    Dave_Conway
    Participant

    Re: Baumatic BT904 built in double oven

    If yours is a Delonghi Dazman that will be easy to identify, which model number do you have please ?

    Dave.

    in reply to: UK Whitegoods September 2006 #176075
    Dave_Conway
    Participant

    Re: UK Whitegoods September 2006

    andy_art_trigg wrote:I wouldn’t mind a streak across the car park at around mid afternoon.

    Request denied 😆

    in reply to: Indesit WDG985W not draining #186460
    Dave_Conway
    Participant

    Re: Indesit WDG985W not draining

    There is no safety device built in to stop the door opening with water in the drum on Indesit washing machines, or hardly any manufacturer for that matter 😉

    If this is a new flat (as in a new build/conversion) it’s almost certain that the spiggot on the sink trap the washing machine waste hose connects to is still “sealed” (the end needs to be cut off) 😀

    Dave.

    in reply to: I can’t get my oven to work #186459
    Dave_Conway
    Participant

    Re: I can’t get my oven to work

    What’s the model number Vicky please ?

    You can also order a user manual from MFI (see the “lost your user manual” thread at the top of the forum) 🙂

    Dave.

    in reply to: Rangemaster 110 #168988
    Dave_Conway
    Participant

    Re: Rangemaster 110

    Ah, the grill element in the oven cavity, in that case P026810 is correct without doubt.

    Connect packing/picking error ?

    Dave.

    in reply to: Lec L-RD50L #186335
    Dave_Conway
    Participant

    Re: Lec L-RD50L

    Sorry, nowt on this model 🙁

    Stoves call required now 😕

    Dave.

Viewing 15 posts - 961 through 975 (of 12,426 total)