Forum Replies Created
-
Posts
-
Re: Rinse hold?
Martin wrote:Sean and I had a long chat on the phone
What with Sean, never ? 😆 😆
Re: AEG Oven turning itself off
Sasq wrote:Would you be kind enough to let me know the part number?
Dave.
Re: Ariston Margherita A1435
madrat wrote:Will be ordaring a new one when Dave gets back in touch.
Done :tup:
Dave.
Re: Electrolux aqualux 1000
hassy wrote:Sounds a bit like bearing.
You’re probably correct 😉
Dave.
Re: Diplomat 8221 determined not to light the ‘Cycle end’ li
There is no button, it’s a method” as you suggest 🙂
Type “smeg and reset” (without the quotes) in the search box 😉
Dave.
Re: Whirlpool ADP4403
From quite an old list, hopefully it will help:
M Lee Appliance Service 01483 764851 🙂
Dave.
Re: Electrolux freezer not freezing properly
I doubt it’s a thermostat problem to be honest.
More likely is the fan motor or the defrost timer.
Power off if checking yourself or check the repairs@ link below for an engineer to check over for you 🙂
Dave.
Re: Smeg D/W DWF66
Nope, it’s a known problem with these, wierd software problems with s/c or o/c coils on the dispenser 😀
Dave.
Re: Rangemaster 110
Found it 😉
The 6235 has two seperate grill elements (left and right but both the same) part number is A025628
Dave.
Re: belling hob chu 177
funkyboogy wrote:cheers dave
how much are these hobs to buy…No idea to be honest – £300 (ish) for Halogen or induction 😕
Dave.
Re: Zanussi FJS1425w E34 fault
Looking at the other Zanussi E34 faults it would point to the analogic pressure switch 🙂
Dave.
Re: Smeg D/W DWF66
reaper wrote:does anyone have any other suggestions.
Dispenser solenoid coil 😉
Dave.
Re: Problems with returns to Connect anyone?
If it’s a positive move from Connect after reading these posts (which they do) then great 😀
Personally, as I visit a PO every day I ask for the freepost address and deal with it that way by getting the CAN from them and boxing any returns but that’s not convenient for everyone obviously…
Dave.
