Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Diplomat 910 AHY43
This is one of MFI’s own manufactured appliances (no idea where they’re made 😕 )
If you remove the 117 from the Masterpart part number, that’s their own, and yes, they are odd 😀
OROTCTLA is £15.99 ex VAT
OSWPK64 is £8.51 ex VAT
Both list, I can get if required (7-10 days though :()
Dave.
Dave_Conway
ParticipantRe: indesit dg6100/1 dishwasher
Broken leads in the door loom or fried timer contacts I would think 🙂
Dave.
Dave_Conway
ParticipantRe: Ariston FM87CIXGB oven door
Have you taken the door off of the oven (as per the user manual) yet ?
It should just be a screwdriver job to be honest.
The inner glass comes complete with the inner panel if it has shattered or has it come unglued ?
Dave.
Dave_Conway
ParticipantRe: Identify this Homark
The best bet would be to take one of the hinges off and either post a picture of that or email it to me at spares@ukwhitegoods.co.uk and I’ll see if I can identify it that way 🙂
Dave.
Dave_Conway
ParticipantRe: Candy Fridge-Freezer
The fridge sensor is foamed in and cannot be replaced by the looks of it, the PCB may also be quite likely to have failed.
No easy checks to be honest, you can try replacing the PCB for about £50 (email to spares@ukwhitegoods.co.uk if you want one) and see if that works or call an engineer (repairs@ link below) 🙂
Dave.
Dave_Conway
ParticipantRe: hotpoint mistral ff 80
Check the hinges etc as they may be bent or worn 😉
Dave.
August 29, 2006 at 9:25 pm in reply to: Candy DF231 ( FDP231 ?) double oven – fan motor required #186951Dave_Conway
ParticipantRe: Candy DF231 ( FDP231 ?) double oven – fan motor required
Hi,
Could you get the 337?????? number from the rating plate please 🙂
Dave.
Dave_Conway
ParticipantRe: Miele Washing Machine Part
I’ll reply to your email for the same Mbutt as soon as I have the info tomorrow 🙂
Dave.
Dave_Conway
ParticipantRe: Zanussi ZCE7700X Fan Assisted Oven Not Heating
bearsieboo wrote:but can’t see the part for my model, ZCE7700X
You can now (edited), it is the correct element. 😀
Dave.
Dave_Conway
ParticipantRe: Zanussi ZCE7700X Fan Assisted Oven Not Heating
bearsieboo wrote:Any suggestions as to what might be wrong?
It’s almost certainly the fan element that has failed, you can find one HERE 😀
bearsieboo wrote:Should I be able to repair it myself?
They’re not to bad to do really but we can’t go in to specifics on how to’s etc 😉
Power off if checking yourself or check the repairs@ link below if you’re unsure 🙂
Dave.
Dave_Conway
ParticipantRe: Zanussi WJS 1265W 91460200500 Part no Required
1249331529 🙂
Dave.
Dave_Conway
ParticipantRe: Schreiber APP6302 fridge door seal
Yep, I can order this for you 🙂
Please check that it is actually removeable first, as even though the seal is shown as a seperate part, quite often they are “moulded” to the door at the manufacturing stage.
Details are:
Door seal – £24.56
Door complete with seal – £43.19Both inc VAT and carriage.
An email to spares@ukwhitegoods.co.uk please for further ordering information.
Dave.
Dave_Conway
ParticipantRe: Hotpoint Fridge Freezer
It’s quite likely the compressor is running constantly as the fridge sensor will not “tell” the PCB it is cold enough to cut out. This will shorten it’s life and run up a huge electricity bill if this is the case.
Either repair or replace to be honest I would say 😕
Dave.
Dave_Conway
ParticipantRe: Ariston LI62 Dishwasher Problems…
Possible draining problem then, I would check the drain hose and where it connects to the sink trap (if it does), apart from that it’s engineer time to be honest.
Check the repairs@ link below 🙂
Dave.
August 27, 2006 at 10:41 pm in reply to: Beko WMA510W stuck in ‘Wash Spin/End’ mode. Gonna get killed #186746Dave_Conway
ParticipantRe: Beko WMA510W stuck in ‘Wash Spin/End’ mode. Gonna get ki
Wozza2006 wrote:I’m going to ask my dad to start the cycle, so if it gooses up I won’t be held accountable.
Good plan 😆 😆
-
AuthorPosts
