Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: Painasonic NN-D801
Clive, send the PCB to QER, they will test andrepair if required and a whole lot cheaper than a new board.
SEME (the main Panasonic agent) want circa £170 ex VAT for it :eeek:
http://www.qer.biz/servReps.htm 😀
Dave.
Dave_Conway
ParticipantRe: Homark cooker knobs
Julie, you need two of 76X8677 at £15.85 each plus £3.50 postage.
Another make may well fit the oven but finding them is the problem, there are leterally thousands of diiferent knobs.
I can order and send to you if required, drop me an email to spares@ukwhitegoods.co.uk and I can arrange for you.
Dave.
Dave_Conway
ParticipantRe: Whirlpool AWZ 121 TUMBLE DRYER BLOWING COLD
The thermostats won’t cause heater failure, in which case, the new element comes with two of them already fitted to it.
http://shop.ukwhitegoods.co.uk/48122592 … er-element
Link above for you for the heater, I have them in stock so it’ll go tommorow if you order tonight or in the morning 😉
Dave.
Dave_Conway
ParticipantRe: diplomat tumble dryer triping rcd
Nope, it confirms it more than anything.
Disconnecting the element will not cause the RCD to trip, try that 1st 😉
Dave.
Dave_Conway
ParticipantRe: neff oven stat
And you Eddie.
Dave_Conway
ParticipantRe: Another Landmark?
Truly amazing in 18 months.
:tup:
Dave_Conway
ParticipantRe: Homark Gas Ignitor Switch Button Cover
That’s no help I’m afraid.
The two are seperate appliances and are only identified by their own model number.
Dave.
December 21, 2004 at 5:08 pm in reply to: Miele Dishwasher – Fully Integrated – inlet/drain light wont #121834Dave_Conway
ParticipantRe: Miele Dishwasher – Fully Integrated – inlet/drain light
If everything is OK with the supply etc, the only other option is to phone Miele customer service and ask their advice.
I can’t think of anything else myself to be honest.
Dave.
Dave_Conway
ParticipantRe: FRIDGE SEAL – Where to buy replacement?
Yep, got it and replied 😀
Dave.
Dave_Conway
ParticipantRe: Creda electric Cooker Faults ??
Model number please 😉
Dave.
December 21, 2004 at 1:47 pm in reply to: Miele Dishwasher – Fully Integrated – inlet/drain light wont #121832Dave_Conway
ParticipantRe: Miele Dishwasher – Fully Integrated – inlet/drain light
Pressure reducing valve ?
That’s only for use in a property with very high mains water pressure isn’t it ?
Can you confirm what the installation instruction says about this please.
Dave.
Dave_Conway
ParticipantRe: FRIDGE SEAL – Where to buy replacement?
Ok, it’s £17.72 inc VAT for the seal.
I can order for you no problem and send with a hinge.
Drop me an email to spares@ukwhitegoods.co.uk and I’ll let you have further details.
Dave.
Dave_Conway
ParticipantRe: Homark Gas Ignitor Switch Button Cover
We’ll need the model number of the hob please.
This will be on the underside of it which will probably mean removing the oven that’s underneath it, unless you have the user manual still and it’s on there.
Dave.
Dave_Conway
ParticipantRe: FRIDGE SEAL – Where to buy replacement?
The hinge is available in the shop here for you:
http://shop.ukwhitegoods.co.uk/24600970 … door-hinge
I actually doubt you need a seal at all now you’ve mentioned the hinge, this will almost certainly solve the door not closing problem as well.
Rather than sell you something you don’t really need, I would suggest you go for the hinge only for now and see what it’s like after fitting.
Dave.
December 21, 2004 at 12:42 pm in reply to: Miele Dishwasher – Fully Integrated – inlet/drain light wont #121830Dave_Conway
ParticipantRe: Miele Dishwasher – Fully Integrated – inlet/drain light
Not wishing to doubt your checks, but I would check the inlet and outlet again.
Is this a new install or a replacement dishwasher (one out/one in) ?
Dave.
-
AuthorPosts
