Forum Replies Created
-
AuthorPosts
-
November 16, 2004 at 8:50 am in reply to: Zanussi Dishwasher DWS939 stopping part way thru the cycle #119778
Dave_Conway
ParticipantRe: Zanussi Dishwasher DWS939 stopping part way thru the cyc
152 46 24-03/6 is £59.94 inc VAT plus about £4 postage.
If you pop your postcode up Will, I can probably help with recommending someone who covers you area.
Dave.
November 15, 2004 at 6:03 pm in reply to: Zanussi Dishwasher DWS939 stopping part way thru the cycle #119773Dave_Conway
ParticipantRe: Zanussi Dishwasher DWS939 stopping part way thru the cyc
Around the door somewhere normally, the number will begin 9118?????
Dave.
Dave_Conway
ParticipantRe: hotpoint DC dishwasher
It’s a Bosch 😉
Has the apparent leak caused a short on the motor and blown the pcb or the triac/transistor that’s used to switch the motor maybe ?
Dave.
Dave_Conway
ParticipantRe: New appliances faulty within a month?
First of all who are your suppliers Furhan ?
If they aren’t offering you any back up when this happens then I would look for another one.
As Alex says, in most cases they will need an uplift/write off report from an engineer to enable them to get credit from Merloni thus enabling them to give you credit for it.
Tell the engineer when he/she arrives that it was a 28 day customer exchange and you want an uplift note, if they refuse, let us know 😉
Dave.
November 15, 2004 at 5:50 pm in reply to: Zanussi Dishwasher DWS939 stopping part way thru the cycle #119771Dave_Conway
ParticipantRe: Zanussi Dishwasher DWS939 stopping part way thru the cyc
It does sound like the matrix (IWMS) associated problem.
It’s not a DIY job really, we’ll also need the product number code from the rating plate to identify which one you’ll need.
Dave.
Dave_Conway
ParticipantRe: diplomat adp 8102 dishwasher problem
That’s will be Penguin then (Chris Chantrell)
Quality Washer Repairs,
10 Church Court,
Yeadon,
W. Yorks LS19 7SA.
Tel: 0113 2500851 (Appointments)
07767 822624 (Engineer)
Email: julia.chantrell@ntlworld.comIf you let him know it’s made by Brandt, he will be familiar with the model as it’s the same as some of the newer Hotpoint’s who use the same dishwasher.
Dave.
Dave_Conway
ParticipantRe: Sharp Combination microwave/convection oven
Yep, got it thanks 😀
I’m dealing with it now for you.
Dave.
November 15, 2004 at 4:08 pm in reply to: HOTPOINT dishwasher – BF50 B/W semi int – replace or fix? #119768Dave_Conway
ParticipantRe: HOTPOINT dishwasher – BF50 B/W semi int – replace or fix
It is on there Martin, just under the GDA brand name rather than Hotpoint for some reason 😕
It’s actually made by Brandt and rebadged.
The leak could be from a number of places really, it would be advisable to call an engineer to check as it may not be a huge problem. Replacement integrated dishwashers don’t come cheap and then you have the added hassles of installing the new one.
If you need help, check in the directories or let us know your postcode.
Dave.
Dave_Conway
ParticipantRe: hotpoint DC dishwasher
Which DC?? is it Tom ? There’s loads of ’em 😉
Dave.
Dave_Conway
ParticipantRe: Sharp Combination microwave/convection oven
It is indeed a Sharp motor.
Price is £26.50 inc VAT and post.
If you want one ordered and sent, drop me an email at spares@ukwhitegoods.co.uk and I’ll arrange for you.
Dave.
Dave_Conway
ParticipantRe: Mods/Site Admin Forum
kwatt wrote:You been watching Shrek again?
😳 SussedDave_Conway
ParticipantRe: Contract vs Chargeable (A History)
kheath wrote:Good work at good rates…not so hard to “want that” is it?
Indeed not, that sums it up in a nutshell really Kev 8)
Dave.
Dave_Conway
ParticipantRe: Sharp Combination microwave/convection oven
I’ll check tommorow for you Carl, it looks like a Sharp to me, the RMOTDA227WREO is a Sharp part number anyway.
Dave.
Dave_Conway
ParticipantPenguin45 wrote:NO would have been enough……..
He’ll yap the hind legs off a Donkey……..
Dave_Conway
ParticipantRe: Contract vs Chargeable (A History)
Yep, it’s about what works best for you 😀
Sorry I forgot Smeg Service (Servevast), no issues from me, apart from the price of some of the parts 😯
The work is fine and the support is superb, rates are OK also, no issues really apart from a constant bombardment of reqests for job updates, many duplicated, I only respond to one of them with the requested information :;If I get hung drawn and quartered because of this post I hope I get some back-up 😀
Dave.
-
AuthorPosts
