Forum Replies Created
-
Posts
-
Re: Homark ceramic hob
Yeah, that part is still available from Delonghi, not cheap though at £25 a piece.
Let me know if you need one, I can order etc for you.
Dave.
Re: AEG F54750VI
It’s certainly a “not filling” fault you have there, best bet, as it’s so new is to call your local Service Force agent to check this out for you.
http://www.serviceforce.co.uk/locator.asp
Dave.
Re: Diplomat APL 8225 doesn’t fill with water
Good news then 😀
That will be the Brandt (French manufacturer) made dishwasher then, they tend to put diagrams with some of their models.
Dave.
Re: Indesit W123
Count how many times the indicator light flashes between pauses, it may help as the machine is detecting an error, hence the dial rotating.
Dave.
Re: Bosch Maxx 100 washing machine wash out failed
Can you post the full model number Frank, something like WFL????/GB?? from inside the door on the rating label.
I’ll have a look at the diagram for you.
Dave.
Re: Candy Trio
In that case, let me know if you want one ordered from GIAS Chris as I have an account with them.
It’ll be quicker than putting on a backorder.
Dave.
Re: Candy Trio
Part number is 82600016 priced at £34 odd from Connect and £31 from Washvac. 😯
Neither have stock though 🙁
There must be an alternative I would think.
Dave.
Re: Mozilla Firefox
The tabbed browser windows is also very good, it saves having multiple IE windows open if you are looking at several sites at the same time.
I’ll download this version and see if there’s any improvements on the standard Mozilla I use ocassionaly.
Dave.
Re: Servis Quartz 1100, s/n unknown, drum bracket broken
A. Schroeer wrote:I just wanted to thank Dave for his help in getting us the spider and tell everybody that the machine is working again 🙂
Thanks Andreas for letting us know all is now well with your washer 😀
And thanks for the thanks, I’m very pleased you found the site was of help to you.
Best regards.
Dave.
Re: Basic Electrical Safety
LOL 😆
John beat me to it just as I hit the reply button.
Built in ovens and hobs do need a special mention I think Mark, I found a gas hob this week with an insulation taped (wires wound together)connection to the single built in oven it was above. Not high amperage admittedly (from the hob), but even so, no isolation switch and the heat generated behind the oven and/or below the hob could easily melt the DIY store “special offer electrical insulation tape” and certainly not in line with current legislation 😯
I would maybe suggest moving this thread to the public forums as well ?
Dave.
