Forum Replies Created
-
Posts
-
Re: Impossible 🙁
Could someone with a working copy of Spareslink check the new part number for ELE2046 please 🙂
Dave.
Re: Impossible 🙁
They don’t have a site with it on, if you send me an email I’ll attach an image to a reply off the disk later 🙂
Dave.
Re: Impossible 🙁
It’ll be a Nardi then I think 🙂
Qualtex ELE2045 (terminals to the side) or ELE2046 (central terminals).
Dave.
Re: Whirlpool DWF 416 prob
Is the start light flashing (pulsing) ?
Continuous flashing is almost always the NTC
Use the forum search, search for NTC in the dishwasher forums and pick out the Whirlpool and Diplomat ones, all the answers are there 😉
Power off if investigating further or check the repairs@ link below for an engineer if you’re unsure.
Dave.
Re: Schreiber APM6321 SX
The hinges are no problem, a very common complaint.
Both are here in the shop@ – 246009800 and 246009700
http://shop.ukwhitegoods.co.uk/hingekit … -hinge-kit
Looking at the front of the fridge, check which has broken (top left, top right etc) and check the desription of each to obtain the correct one, if both are broken, order one of each (it’s best to replace them as a pair to be honest).
Dave.
Re: DWF50S flashing eco & prewash lights flashing
Counting from left to right (1 to 4 normally) which led’s are flashing ?
Dave.
Re: Whirlpool adp 962 fault
Continuous flashing is almost always the NTC as you suggest 🙂
Use the forum search, search for NTC in the dishwasher forums and pick out the Whirlpool and Diplomat ones, all the answers are there 😉
Power off if investigating further or check the repairs@ link below for an engineer if you’re unsure.
Dave.
Re: oven shelf part no.
Universal one would be the best bet I think, JMB spares are a nightmare (if it is branded JMB of course) 😉
Dave.
Re: Whirlpool adp 962 fault
Is the start light flashing any sort of sequence after you push the start button ?
Dave.
Re: Hygena Select (APL 8224) not draining
KevB wrote:I then took the cover off the top of the door and set the door-closed switch to shut with the door open so I could watch what was going on… and to my surprise the drain cycle started working occasionally, not every time, and not in a predictable way. This got me thinking that the problem lies either with the door-closed switch, or the timer control module.
😯 Please don’t live test like this, it’s dangerous !:zap:
There is no module, it has a mechanical timer.
My thoughts are that the draining is fine but the dishwasher is stopping on the heat stage due to a tripped thermal cut-out or failed heater.
Dave.
Re: Electrolux ESI 604 – not filling
Certainly worth a try Hooch 🙂
There’s little else you can do from the inside so it will have to come out anyway.
Rememeber to power off :zap:
Dave.
Re: Creda Plan Europa Solar Plus oven
Oops, sorry I missed the spec number 😳
This is the one:
http://www.ukwhitegoods.co.uk/modules.p … cts_id=338
Merloni changed the part number for some reason 😕
Dave 🙂
