Forum Replies Created
-
Posts
-
Re: You have got to look at this! priceless!
And none of this is true 😆
http://www.chavtowns.co.uk/modules.php? … le&sid=289
Dave.
Re: Indesit WD10 problems
lotusray wrote:how on earth are manufacturers aloud to get away with it????
It’s called consumerism, I wouldn’t necessarily lay all of the blame with the manufacturers. The public have, over the years pressurised the large retailers into demanding cheaper everything, so in turn, to keep the sheds happy the manufacturers have had to cut corners on quality to meet demand for lower priced appliances.
There does seem to be a slight upturn in this trend of late though, mainly in consumer attitude, and we should (and probably are) helping that 😀
Dave.
Re: Servis BFC371B Oven not heating up
Jason, is the oven fan assisted ?
Also, could you check the model number please, no listing for it.
Regards
Dave
Re: Hi NEW user… Haier spares? or bad question…
Soveriegn Appliances on 01527 578333 are the distributor for spares as well as the product I believe.
Regards
Dave
Re: Creda T620 Condenser Dryer
Try bypassing the relay and see what happens, they are dropping like flies 😉
Dave.
Re: Indesit WE12 error F12 Evolution
Anonymous wrote:I am not sure how to reset the machine.
Turn the washer off, then turn the dial to any black dot. Now turn the washer on and you should see the power indicator light flash 3 times. On the third flash turn washer off again and select a wash programme. Turn the washer on again and after a couple of seconds the machine should start.
Like that 😉
Dave.
Re: door seal for philco DW 1960 dishwasher
Hi.
I can get the door seals for you no problem, details of the parts:
Lower door seal £9.14
Upper door seal £17.58Postage £5.00
If you would like one or both, let me know by email and I will let you have the payment details.
Regards.
Dave.
Re: Neff FL W4380X1 GB/01 washing machine.
It may well be the board then.
Try QER, they may do a test and repair service on those.
http://www.qer.biz/servReps.htm
Dave.
Re: Dyson Washing Machine?
Well, I know that the valves are Eaton type and the motor is made by Ceset, so on the assumption that Dyson are not manufacturing many of the components themselves, the pump will almost certainly be an Askoll.
Dave.
Re: NEff FL W4380X1 GB/01 washing machine.
I know it may sound obvious but has the on/off switch been checked ?
I’m not sure how it’s wired, but I would magine 240V would reach certain parts of the main PCB even in the “off” position.
We’ve had loads of those switches fail.
Welcome to the site by the way 😀
Dave.
Re: DASA!
Yep, it was, and it’s fecking horrendous. Mind you, Ken’s photo isn’t there so it could be worse 😉
Dave.
Re: Teba Door
OK, thanks for the info Richard.
I wasn’t blaming ISDAL by the way, but the info I was given yesterday from your office was that all Teba refrigeration parts were obsolete with no further explanation. No matter though.
What makes this worse for our customer is they are in a related trade and one of their engineers damaged the fridge door while carrying out other work, looks like they’ll have to buy her a new fridge now, hope they are fully insured 😉
Dave.
