[Dave_Conway]

Re: Smeg Home Garden

OK, give me a clue, I checked the disk I have and can’t find anything refering to home or garden 😕

Dave.

[Dave_Conway]

JOHN M wrote:Anyone had these symptoms, first 3 lights flashing 4 th off 5th on ?

John, could you post the model number please, the thread title is ADP8224 which doesn’t have the same display type you refer to.

Thanks.

Dave.

[Dave_Conway]

Re: ind d/w d41uk

Looking at the diagram and if you have 240v to the module there’s little else it can be by the looks of it.

Part number is C00086607 list price £43.86 ex VAT, alternatively you could contact one of the module repairers in the links section and see if they can either supply a refurb one for “trial” or return the suspect module for testing.

Dave.

[Dave_Conway]

Re: Indesit F15 Error Code

According to the error codes list E15 doesn’t exist, that’s not to say that it isn’t coming up in the display though, sounds like one of the one’s that needs resetting maybe ?

If you look in this forum at the various Indesit/Ariston error codes, there’s a few replies suggesting how this is done, I can’t remember exactly how off the top of my head.

The lack of technical information from Merloni is rather restricting unfortunately.

Dave.

[Dave_Conway]

Re: Hotpoint Advertise Franchises!

whitegoodsman wrote:just seen the same ad in leicester local paper

So the area widens, anyone else seen the ad anywhere ?

Dave.

[Dave_Conway]

Re: Waste Disposal Unit – ‘In sink erator – Model 55.1’

Enough ❗

I shan’t bother to take any on 😆

Thanks for the info here and the PM Cornwell 😉

Dave.

[Dave_Conway]

Re: Waste Disposal Unit – ‘In sink erator – Model 55.1’

I meant to ask the other day about these but forgot.

We sometimes get asked to repair waste disposal units but refuse as it’s something I fealt was more trouble getting involved in than it’s worth.

Is it worth it ?
Are the spares easy to obtain (depends on the brand I know, but generally) ?
What sort of charges are applied to to the repairs etc ?

Feedback would be appreciated, thanks.

Dave.

[Dave_Conway]

Re: Flying toolbox?

kheath wrote:Ken and I rate you Dave……..

Thanks, I think 😕 😆

We have no rating because
1/ we have only been D&G agents for a few months and
2/ we’ve never had a referal from the Flying Toolbox.

I guess the system relies on customers going back to the site and ranking the service they have recieved, which is damn good idea, we all like to know how we’re doing out there, well I do anyway.

And Alex, EX14 ? The lovely Devon town of Honiton and it’s surrounding Hamlets, very interesting 😆

Dave.

[Dave_Conway]

Re: Hoover Interact AAA140 “Error 3”

I would change the pump then, it’s almost certainly a magnetic type and we all know how annoyingly unrealiable/intermitent these are.

Universal askol/plaset should do the trick.

Dave.

[Dave_Conway]

Re: Known Error Codes

Hoover Oven Error Codes

ER01 Faulty communication between pcb’s

ER02 Faulty programme selector switch

ER03 Faulty programme selector switch

ER04 NTC Temp sensor on mother board open circuit

ER05 NTC Temp sensor on mother board short circuit

ER06 Temperature on mother board exceeded 85C

ER07 NTC food temp probe short circuit

ER08 NTC food temp probe open circuit

ER09 NTC food temp probe exceeded 85c

ER10 NTC oven probe open circuit

ER11 NTC oven probe short circuit

ER12 Oven case temp exceeded 300C

ER13 Preset temp of cooking was not reached within 105 minutes

ER14 Mechanical timer open circuit

ER15 Door sensing switch open circuit

ER16 NTC temp probe on display board open circuit

ER17 NTC temp probe on display board short circuit

ER18 Display board temp exceeded 75C

ER19 Severe malfunction of EEEprom on mother board

ER20 Software error on cooking recipe file

[Dave_Conway]

Re: Known Error Codes

Hoover Washing Machine error codes

E0 Severe error on mother board

E1 Door interlock faulty or open circuit

E2 Water inlet problem, 3.5 minute time out on fill

E3 Water drain problem 3 minute time out

E4 Anti flood device activated

E5 NTC temp probe faulty or open circuit

E6 Severe error on mother board (another one ? 😕 )

E7/E8 Motor or drum jammed, motor tacho faulty

E9 Faulty triac on mother board (doesn’t mention which one)

EA The programme selector was not finding the expected value of resistance while advancing in rotaion (WTF ?)

EB Faulty electronic drying module (W/D’s only)

EC Faulty communication between pcb’s

ED Faulty communication between pcb’s

Some rephrasing done to make some sense 😉

Dave.

[Dave_Conway]

Re: Hoover Interact AAA140 “Error 3”

Error 3 or E3 as it should be displayed is not draining quickly enough (3 minute time out).

Probably an intermittent pump, or partially blocked waste somewhere ?

Amazing what you find when you look hard enough 😉 New Hoover error codes will be in the “known error code” thread shortly 😀

Dave.

[Dave_Conway]

Re: NESN

http://www.nesn.co.uk

Dave.

[Dave_Conway]

Re: Happy Birthday UKW!

It doesn’t seem more than a few weeks ago I logged on to my home PC one Sunday evening to check my emails only to find one with the subject….“While you lot were out sunbathing……….”

And now look, one year on, over 750 members, a forum more active than anyone would have imagined in the time span it’s been live, new news stories posted virtually every day, two succesful meetings and a whole load of new friends.

I’m glad and very proud to be a part of it 😀

Dave.

[Dave_Conway]

Re: Flying toolbox?

I just looked and I haven’t been rated yet 😕

Ah well, it takes a little time I guess 😀

Dave.

[Author]

Posts