Forum Replies Created
-
Posts
-
Re: Miele K2214S Thermostat
raynerph wrote:If this project does get going we would hope to supply the evaporators!
Presumably the system would have to be sealed and made in such a way that manual assembley of the fridge would not allow any pipework damage, fracture etc.
raynerph wrote:Regarding the original thread, I have a very strong suspicion that Liebherr and Miele are more or less the same appliances, if so, Coolectric, Nr Wakefield might have a part – 01977 665665, but no doubt at a similar rip-off price.
Leihberr are not the same as Miele as far as I am aware, the one’s we see certainly aren’t anyway.
Dave.
Re: Creda IWD12 built in washer dryer
It’s probably an ‘A’ rated applaince I guess.
Tablets do seem to have this problem with some washers where they don’t dissolve correctly, mainly due to either the machine being cold fill only or the customer does not have any hot water to supply the hot valve. The tablet starts to dissolve in the powder tray in theory, without hot water or as is the case with ‘A’ rated appliances, not enough water intake generally to start the dissolving process.
I would suggest your customer uses powder, it’s the only solution I have found in most cases.
Dave.
Re: New Director
ted wrote:who the fuck gives a shit what those wankers do……..
What they dont do is pay their agents as several of you along with me are finding outQuite, but let’s not forget that they are still there and they still have agents old and new who they can fuck about.
I’d rather prefer to know what they are up to given their history.
Dave.
Re: Homark door handle model 02-700401
Hi,
You will need a new handle.
I can order/post one for you, if you drop me an email I’ll sort out prices etc for you.
Dave.
Re: New Director
Not neccassarily Del.
NESN have several directors, the white goods director’s post has been vacant for more than a year ago now as far as I know.
It’s taken them this long to replace, hardly surprising as no-one wants the job I don’t suppose and Mr Strollo’s company, appliance-xpress is owned by NESN anyway so I don’t expect the representation will be unbiased.
Dave.
Re: Stoves Belling DW 602/2 Leaking
I know MFI issued a modified circ pump for their equivelent model (AHY8101/8102). I don’t recall replacing one though.
MFI agent required for more info please for Kirk.
Dave.
Re: Westinghouse WM bearings
I can’t see this model on the disk supplied by EAC for Westinhouse.
Any other numbers on it Kirk ?
Dave.
Re: Miele K2214S Thermostat
shane wrote:I thought all the “thickies” lived in our parish.
Nope, they’re everywhere. It’s the peril’s of living in a “DIY” orientated society.
Customer thinks….”If I can assemble a flat packed wardrobe , I can do anything” 😆
Now where did I put my nail gun……..
Dave.
Re: Stoves Belling DW 602/2 Leaking
If it’s a Brandt made dishwasher, then it’s a case of removing the side panels IIRC.
Easy way to tell if it’s Brandt, is the timer right at the front of the lower section below the door on the left looking from the front ?
Dave.
Re: Panasonic NN8557 combi oven
Linda, I know you asked about this before, I don’t know if it’s any help but Google came up with this:
http://www.donberg.ie/descript/p/pamw127.htm
They’re an Irish company who seem to have it listed.
Dave.
Re: The Encyclopedia
BobHope wrote:Thank you Dave,
i owe you a pint.
Cheers Bob
No probs, I hope you get some work from it 😀
Dave.
Re: LG Toploader WFT1031TP
technics1200 wrote:Its official…LG are claiming that there boards are faulty
That’s essentially what they told me, ours worked on the third pcb.
Still waiting for credit on the first two though 😥
Dave.
