Forum Replies Created
-
Posts
-
Re: Spare Part Warranties
kwatt wrote:However I also know that some extract the Mick.
That wouldn’t include a Great British Domestic Appliance Repair type of company I suppose would it ?
Dave.
Re: Teba/gunkol built-in oven. Manual required. Model A02004
BobHope wrote:, i also have a number of spares if you ever get stuck for something that is out of stock at ISDAL
OK, thanks Bob, much appreciated.
Dave.
kwatt wrote:but I think I’ll have to drive.
Me too 🙁
£72 each way with Flybe, ta for the offer though.
Dave.
Re: breakfast at teds
Ted, I think the least we can do for you and Bridie for you’re hospitality is to take you both for a drink and a bite to eat, if you can get a babysitter of course.
I’ll certainly try and get there earlyish, Ken and I did ponder on the idea of me flying to Glasgow and travelling down with him, I’ll check out the flight times and see which way works best.
Thanks again, oh and………………..
…………you’re very kind 😆
Dave.
Re: Teba/gunkol built-in oven. Manual required. Model A02004
BobHope wrote:i will send a copy of the instruction manual that you require.
Where do you get ’em from Bob ?
Dave.
Re: Hotpoint WM Series Armatures OBSOLETE!
martin wrote:I would not class myself as a cowboy for wanting to fit an armature and new brushes to an otherwise perfectly good motor!
I don’t believe any infered you were Martin, it’s just we all know that the unscrupulous out there will take a customer’s motor away and refit it a day later charging for a new motor having only repolaced the armature. I am of the same opinion as you, we carry the armaure and loads of brushes on the vans, and only charge for an armature and brushes, or just brushes, plus our normal labour charge.
There will, no doubt be some loss of work due to the difference in motor replacement price as opposed to an armature and/or brushes, but it may also increase as the DIY-ers will not tackle motor conversions.
We’ll have to wait and see I suppose.
Dave.
Re: Hotpoint WM Series Armatures OBSOLETE!
OK, thanks.
The equivelent FHP motor if anyone needs to know to replace the 1601978 (small digital tacho) is part number 1604822, this should fit virtually all the WM range I believe.
Dave.
Re: Miele dishwasher g858
Scotty wrote:Dave are their any test progs or fault finding charts on the disk
ScottSadly no. It’s just a parts identification disk, there is however a technical support telephone number on the paperwork that came with it to activate the disk, it may be worth a try, it’s 01235 233141
Dave.
Re: Hotpoint WM Series Armatures OBSOLETE!
Thanks for the info Brian 🙂
What about the carbon brushes ?
I’ve just ordered a load of 160197877 motors 😉
In some ways as Ken said this could actually be beneficial as it will kill off the dodgy guys who fit new armatures and charge customers for new motors, also when the 1601978 motors run out, every motor replacement will be an FHP conversion, which will mean wiring modifications. Customers and cowboys alike will probably shy away from this, which will mean more work for us, my only reservation is whether the customers will be willing to pick up the £100 + price tag for a fitted motor.
Dave.
Re: Teba/gunkol built-in oven. Manual required. Model A02004
Hi,
I have checked the parts listings, the user manual isn’t listed and there doesn’t appear to be a UK website only the Turkish (where they are made) one, which is OK if you can read Turkish.
I would suggest you phone the UK appointed agents, Independant Service on 01977 665590.
Hope that helps
Dave.
Re: Hotpoint WM Series Armatures OBSOLETE!
It looks like the 1603071 is definitely obsolete, the 1603070 (same less brushes) may still be available. I have emailed Merloni asking them.
I’ll get back with info when I have it.
Dave.
Re: blomberg switch bank
Hi, the part number is 55X6275, priced at £19.71 inc VAT and post.
If you need one, email me and I’ll order one for you.
Dave.
Penguin45 wrote:Yeah, but it’s a no faulter the OOB bit – wastes everybodys time.
😳 Sorry I thought you were referring to seamy’s post about eco balls/blocked sumps etc. I agree, it may be an idea to put something in the public forum about OOB problems generally as most manufacturers incorporate this now.
It is already in the FAQ which can be read by the public, but an additional mention in the forums wouldn’t go a miss I suppose.
Dave.
