Dave_Conway

Forum Replies Created

Viewing 15 posts - 1,171 through 1,185 (of 12,426 total)
  • Author
    Posts
  • in reply to: Whirlpool F/F condenser motor #184619
    Dave_Conway
    Participant

    Re: Whirlpool F/F condenser motor

    It looks a special one to me, there’s a picture on Connect’s site of it.

    Try ASD in Leeds, they may have one:

    http://www.asdservices.co.uk

    in reply to: Candy Hob PAV32 #184442
    Dave_Conway
    Participant

    Re: Candy Hob PAV32

    Confirmation from GIAS, the part number is now 92917343….

    … at an astonishing £64.14 ex VAT list price :eeek: :tomato:

    in reply to: Candy fridge freezer #184616
    Dave_Conway
    Participant

    Re: Candy fridge freezer

    There’s a temperature control problem but this is an electronically controlled unit, one for an engineer to be honest.

    Check the repairs@ link below, that should provide one for you 🙂

    Dave.

    in reply to: Candy CPCA 291 FFK Fridge not cooling #184578
    Dave_Conway
    Participant

    Re: Candy CPCA 291 FFK Fridge not cooling

    Electronically controlled unit, one for an engineer to be honest in that case.

    Check the repairs@ link below, that should provide one for you 🙂

    Dave.

    in reply to: Candy CPCA 291 FFK Fridge not cooling #184576
    Dave_Conway
    Participant

    Re: Candy CPCA 291 FFK Fridge not cooling

    It may be worth completely defrosting it, there may be an ice build up in the freezer stopping the cold air reaching the fridge 🙂

    Dave.

    in reply to: Frigidaire GPSZ28V8AB3 Side by Side Fridge Freezer #184581
    Dave_Conway
    Participant

    Re: Frigidaire GPSZ28V8AB3 Side by Side Fridge Freezer

    Exploded/parts list/wiring digram on the way 😀

    Dave.

    in reply to: Replacement Glass for a Ceramic Hob #110187
    Dave_Conway
    Participant

    Re: Replacement Glass for a Ceramic Hob

    snoop wrote:I cracked my glass top dave will you please tell me how to get one and how much it will be american. thank-you

    Hi Rebecca

    Could you let me know the make and model of the appliance please 🙂

    Thanks.

    Dave.

    Dave_Conway
    Participant

    Re: Help Please – De Dietrich VZ9996U1 Not Rinsing Properly

    It’s possible that the rinse aid isn’t being dispensed but it’s quite a rare fault to be honest.

    Have you changed detergent recently as it sounds more like a poor wash result due to low quality powder/tablet etc to me 🙂

    Dave.

    in reply to: burning smell from washing machine #184548
    Dave_Conway
    Participant

    Re: burning smell from washing machine

    Rust spots would indicate the bearings are failing.

    Has it got noisier on spin recently by any chance ?

    Please check the many other posts regarding Hotpoint WMA prefixed models and bearing failure 🙂

    Dave.

    in reply to: Creda 17084E DC 56163086 #184208
    Dave_Conway
    Participant

    Re: Creda 17084E DC 56163086

    Alanj wrote:Hi Guys,

    does anyone have a copy of the wiring diagram that is packaged with the above pressure switch, or a copy of a Creda 17084E manual.

    Alan

    Copied here to keep things tidy 😉

    in reply to: INTERGRATED WASHING MACHINES #184554
    Dave_Conway
    Participant

    Re: INTERGRATED WASHING MACHINES

    :waving:

    in reply to: INTERGRATED WASHING MACHINES #184553
    Dave_Conway
    Participant

    Re: INTERGRATED WASHING MACHINES

    It’s probably the pump so it won’t be an expensive repair.

    Check the repairs@ link below, you should find someone there that can help 🙂

    Dave.

    in reply to: AEG Favorit 44070i Door will not open #184429
    Dave_Conway
    Participant

    Re: AEG Favorit 44070i Door will not open

    Oops 😳

    Sorry ignore that, I thought it was a washing machine and didn’t look at the forum header 🙁

    in reply to: Broken fridge/freezer – repair or replace? #184488
    Dave_Conway
    Participant

    Re: Broken fridge/freezer – repair or replace?

    JimMarshall wrote:Anyone know if/where I can get a fridge shelf or rear surround part?

    It’s made by Brandt, they only supply the complete shelf/support as one item, priced around £25 each. I can order no problem for you.

    See how the defrost goes and if you need a shelf, drop me an email to spares@ukwhitegoods.co.uk quoting the part number 43X8650 🙂

    Dave.

    in reply to: Hotpoint DF61 #184484
    Dave_Conway
    Participant

    Re: Hotpoint DF61

    £35 – £40 depending on who you order it from 😉

    Dave.

Viewing 15 posts - 1,171 through 1,185 (of 12,426 total)