Dave_Conway

Forum Replies Created

Viewing 15 posts - 1,186 through 1,200 (of 12,426 total)
  • Author
    Posts
  • in reply to: Hotpoint DF61 #184482
    Dave_Conway
    Participant

    Re: Hotpoint DF61

    263187 appears to be the one, not sure about the change during the date code though so it may not be correct but the picture looks pretty much right 🙂

    Dave.

    in reply to: Blomberg 1501AAA Motor shutting down #184462
    Dave_Conway
    Participant

    Re: Blomberg 1501AAA Motor shutting down

    Yep, we can supply, £155.00 (inc) is the best I can come up with.

    Drop me an email to spares@ukwhitegoods.co.uk if you’d like one 🙂

    Dave.

    in reply to: Ariston AIB 14 #184475
    Dave_Conway
    Participant

    Re: Ariston AIB 14

    Software or configuration error.

    Using the search here:

    http://www.ukwhitegoods.co.uk/modules.p … ile=search

    Search for F09 there’s a couple of references to it 🙂

    Dave.

    in reply to: wpl freezer door seal #184473
    Dave_Conway
    Participant

    Re: wpl freezer door seal

    The door seal is shown seperately but you’ll need to check that is can be removed as often they are moulded.

    Part numbers are:

    Seal – 4819 468 18316
    Whole door – 4812 416 18819

    Dave.

    in reply to: Nardi grill/oven #184382
    Dave_Conway
    Participant

    Re: Nardi grill/oven

    Around the door normally but it could also be on the outer cavity which means removing the oven from it’s housing (I assume it’s a built in single oven ?)

    Nardi models generally start with EK or FE

    Dave.

    in reply to: Electrolux 3115B Fridge freezer #184470
    Dave_Conway
    Participant

    Re: Electralux 3115B Fridge freezer

    The model number doesn’t exist according to Electrolux 😉

    What’s the PNC and I’ll check for you ?

    Dave.

    in reply to: Blomberg 1501AAA Motor shutting down #184460
    Dave_Conway
    Participant

    Re: Blomberg 1501AAA Motor shutting down

    It is a complete motor replacement, £130 sounds cheap though, have you been quoted for one already ?

    Dave.

    in reply to: brandt fridge freezer #184465
    Dave_Conway
    Participant

    Re: brandt fridge freezer

    They may have contaminated the system with oil if it was switched on straight after moving it.

    It may be worth leaving it off for 24hrs and see if that makes a difference.

    Dave.

    in reply to: Main oven not working, how do I test the element please #184468
    Dave_Conway
    Participant

    Re: Main oven not working, how do I test the element please

    Almost certainly the element but I’ll need the model number please to check for the correct one 🙂

    Dave.

    in reply to: E/lux EW1006F Wash M/c Parts Diagram Required #184444
    Dave_Conway
    Participant

    Re: E/lux EW1006F Wash M/c Parts Diagram Required

    Complete control panel only Laurence I’m afraid, it comes with the perspex part and the knob, soap drawer front etc 😕

    Part number 1248057208 at £45.13 ex VAT list 😥

    Dave.

    in reply to: Candy Hob PAV32 #184440
    Dave_Conway
    Participant

    Re: Candy Hob PAV32

    It’s noit on the GIAS price list so it may have been superseded or even obsolete 😕

    Have you got the serial number and I’ll try and find out for you 🙂

    It looks much like an Ego simmerstat to me so it may be worth checking the numbers on the stat itself and getting pattern ones 😉

    Dave.

    in reply to: Candy Hob PAV32 #184438
    Dave_Conway
    Participant

    Re: Candy Hob PAV32

    93560985 Bryan 🙂

    Dave.

    in reply to: AEG Favorit 44070i Door will not open #184428
    Dave_Conway
    Participant

    Re: AEG Favorit 44070i Door will not open

    If the machine has still got some water in the drum it may affect the door interlock (won’t release until empty), it may be that ?

    Dave.

    in reply to: Rangemaster 90 #184430
    Dave_Conway
    Participant

    Re: Rangemaster 90

    Connect or SEME but you’ll need the serial number to identify the right parts I’m afraid 🙂

    Dave.

    in reply to: Indesit D61D behaving oddly….Help! #184393
    Dave_Conway
    Participant

    Re: Indesit D61D behaving oddly….Help!

    smegbot wrote:any suggestions whats wrong here?

    The circulation motor failing I would think, possibly caused by an internal leak 😉

    Power off if investigating further please :zap: or check the repairs@ link below for an engineer to diagnose for you 🙂

    smegbot wrote:who let the smegs out

    😆

    Dave.

Viewing 15 posts - 1,186 through 1,200 (of 12,426 total)