Forum Replies Created
-
Posts
-
Re: feed back
abbots wrote:sory can’t find original topic.
Click on the “profile” button at the bottom of your own posts, you can find all previous from there :tup:
dave.
Re: Hotpoint FDW60 dishwasher pump wont run
Turning it upside-down will undoubtedly have caused this I’m afaid 🙁
The pressure system will have water ingress in to areas that it shouldn’t have.
Please remember to power off when checking :zap:
Dave.
Re: Hotpoint WMT03 wiring diagram. Problem Sorted in 30 seco
chatty wrote:Problem Sorted in 30 seconds
Please enlighten us as to where you obtained the information (wiring diagram) ? 🙂
As for the drum/bearing change, it depends on the version fitted as you will discover in….. months 😉
Dave.
Re: AMP8522 Intergrated Washing Machine
1230J5 (streeeeetch on type by the looks) 🙂
Servis part number 416002800
Dave.
Re: w/pool d/washer
NTC (thermistor) perchance Paul ? 😉
Especially if the light starts flashing after the start button is pressed 🙂
Dave.
Re: Creda 17084E DC 56163086
iadom wrote:I seem to remember that the replacement pressure switch was a later type that included a few wiring mods, perhaps this machine has the later switch fitted as standard.
Yeah, sorry, the pressure switch is only fitted to later models with the hybrid timer unit.
Order a pressure switch, it may come with the diagram as part of the mod 😉
Dave.
Re: Hotpoint Mistral FF72 Fridge Freezer
If the fan isn’t running the compressor will cut-out (overheat) especially in the recent weather we’ve been having 😉
It may be the motor itself that has failed ?
Dave.
Re: Nardi grill/oven
Alastair wrote:Are these switches available anywhere.
It shouldn’t be a problem, let me know the model number and I will check for you 🙂
Dave.
Re: Creda 17084E DC 56163086
Here’s the Hotpoint model the pressure switch is fitted to if anyone has the info:
9529A, 9529P, 9529W, 9539A, 9539P, 9539W, 9549A, 9549P, 9549W, 9777P, WM23A, WM23P, WM23W, WM26A, WM26P, WM26W, WM31A, WM31P, WM31W, WM32A, WM32P, WM32W, WM35A, WM35P, WM35W
Part number 1600856.
It’s actually a 3 level (the 3rd being the silent touch contact for flood protection – this will be terminal 36).
The other two levels will be:
Level 1 – common = 11 – 12 and 14 will be n/o and n/c
Level 2 – common = 31 – 32 and 34 n/o and n/c etc.That may help a bit ?
Dave.
Re: Hotpoint Mistral FF72 Fridge Freezer
Is the condenser fan (the one near the compressor) never running ?
If it’s not, that is the problem 😉
Dave.
Re: Belling XOU500 SS/2 Fan oven motor
Just under £50 from Connect Simon (still a special order though).
Dave.
Re: Cooling problem with a Hotpoint Mistral 8596P
As long as you’re certain the thermistors are fitted correctly and the various panels are also correct it does seem to point to the PCB to be honest but at £100 odd it could be an expensive mistake to take a chance on one 😕
Dave.
