[DDA]

Re: whirlpool generation 2000 display fault

Cheers for the reply
Customer says is a g2p62f/ss model and the first letter is a “t” and the last is a “L” the middle seems to be some symbol.
i thought this was just a display or pcb issue as doesn’t look like an error code but might be wrong.

[DDA]

Re: dryer fire risk

Does anyone know what the status would be for reconed appliances. Would hotpoint modify or would we be liable for cost of updating. also any adea of that parts are required?

[DDA]

Re: samsung rsh1 with blown fuse in mains filter pcb

cheers for that. any idea what the ratings the heater fuse needs to be (i think there 12.5a but not to sure). they haven’t gone but just ant to order them for stock at the same time in case.

[DDA]

Re: C00143206 capacitors ?

cheers you are a star

[DDA]

Re: Hotpoint FZFM171 all lights flashing

also got another Hotpoint ff7190aep fridge freezer flashing lights again. the freezer is cook but the fridge is warm. i haven’t called out to this but wondered if this was an error code or if it was just indicating a fault.

[DDA]

Re: Miele G1140SC Dishwasher

no water in the base atall

[DDA]

Re: bosch srv43a03gb/08 dead pcb

i thought that had gone. cheers for the info.

[DDA]

Re: Miele G1140SC Dishwasher

There is distribution of water in the machine (both spray arms are spraying) and the machine does stop filling so assume the pressure / flow sensors are ok.

[DDA]

Re: Miele G1140SC Dishwasher

i have the same issue with this dishwasher. did you manage to get anywhere.
Anthony

[DDA]

Re: bosch srv43a03gb/08 dead pcb

is this image any good

[DDA]

Re: Fisher pakel drawer dishwasher dd603

sorry the correct link
http://vimeopro.com/fisherpaykeltechnic … ing-videos

[DDA]

Re: Fisher pakel drawer dishwasher dd603

Hi John,
I have a job with the same dishdraw. f4 no heat. I have replaced the heatplate and still no heat. I think its going to be the confroller but not to sure as ive only just seen this thread.

Do u have the service manual so i can check the rest of the componants before i rush into buying any parts . . . . again.

also i found a website with helpfull videos for the Fisher pakel range.

http://vimeopro.com/fisherpaykeltechnic … ing-videos?

[DDA]

Re: Whirlpool American style fridge freezer fault

That’s brilliant i had thought this may be a possibility but i wasnt 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain. Thank you very much for the help Steve

[DDA]

Re: DW2677/2 (854567715880) stopping mid cycle with 3 beeps

Hi Dave,
it just stoppes as if it has ended the cycle. if another program is set theb it starts the program and stops again with 3 beeps

Anthony

[DDA]

Re: samsung rsh1dbmh1/xue fan error and ice build up

Thanks Bob, i have called out to this job and you where right about the sensor. i have moved is to the end of the evap outlet.

i haven’t fitted any mod kits to this model but did fit a new fridge evap cover in November as the fan was damaged from the frost, will i still need the mod kit?

Also, is there anyway of finding out what changes or mod kits are needed for the samsungs as moving the sensor was not instructed when with any documentation for the evap cover or sensor and have had to find out the long way for a few of the models and repairs.

Thanks for the advice, really appreciated
Anthony

[Author]

Posts