Forum Replies Created
-
Posts
-
Re: hoover hnc180 leaking after repair
have arranged to bring into the w/shop as have always had issues with the units leaking when we have removed the front ducting on the hoover ctd units in the past. is this something you have had any experience of on this range, or any prevous. of so is there anything i should avoid / try
thanks for the advice.Re: hoover wmh148df continous turning on and off
Sorry looking back my description of the fault was a bit vague.
As soon as the machine is turned on the pcb power up then down again every 5 ish seconds.
No programs have been started.
hope this helps
thanks Jem, I will look for the parts you mentioned ready to try.Re: Baumatic b720 / 014011843 element
Thanks for the info, apparently the replacement element is the 2300w element. thanks for all the help
AnthonyRe: fisher & paykel ff how to remove side panels in freezer
thanks for that john, must have missed them. have you any idea what it means when the unit beeps twice when ether door is opened and flashes 2x colours on the thermometer symbol in the fridge.
thanks
AnthonyRe: smeg built in dishwasher flashing all lights
that sounds like the ticket, ill give it a try and let you know
thanksRe: smeg built in dishwasher flashing all lights
ok, i have checked the door switch but there is no sighs of any faults. i have had the machine collected to the w/shop and have spent some time testing and watching.
the dishwasher seems to run for a minute then stops, turning the program selection and the “eco” LEDs off and then on again, the rinse-aid and the salt LEDs stay on.
then the pcb beeps twice then the motor starts running again.
this then repeatsthe symptoms are exactly as if the machine was powered off and then quickly on again straight away at the plug or the power switch. (different to if the doorbeing opened as this would leave the cycle light on.)
i have tried another mains suppressor (not the exact part but is a d/w suppressor)
i have tried another mains lead
i have bypassed the wiring from the mains suppressor to the power switch
i have by passed the power switch
nothing i have tried has made any difference
the only other issue that may have an part to play are the “eco” led (fitted too a separate pcb to the main pcb) flickers once the initial drain had finished and the d/w is filling (is static then the d/w is running the initial drain)
this has stayed the same through all tests.
also the mains filter looks like it has blown in the past but seems to be working atm
Re: fisher & paykel ff how to remove side panels in freezer
Pulling on the runners worked a treat, as worrying it was.I have managed to get to the bottom of the fault, i have another issue with the fridge door handle being loose. and thought as i was waiting for parts to come into stock I’d see if anyone knows how to tighten them up before i start striping the door down
any ideas?
thanks
Re: daewoo washing machine carbon burshes
no problem, thanks for all the efforts, i will have a crack at the bosch brushes. im an expert in carbon sculpture.
Re: fisher & paykel ff how to remove side panels in freezer
i will try pulling off the side pannels and the manuals were realy helpfull for this and som otheer isues, ill let you know how i get on.
cheersRe: bosch sms40a08gb/03 dishwasher not heating
thank you for all the replies, have been a massive help
Re: W864 flashing wash light on hot washes,
cheers martin,
ill check it out and let you know
AnthonyRe: Ccandy built under double cooker with small fan element
Cheers for the response. had a couple more of the elements come through since the post, I’m expecting more of the same in the future so will defiantly be investing in stock of these to speed up the repairs.
Re: gorenje tumble dryer fault, poss fault code
thanks for all the help. worked out that the pcb is selecting the start delay when start button is pressed. cheeked all the button mechanism, defenestrate pcb fault. gona be a write off unless anyone can give any tips?
thanks anyway, always appreciated.
