delahart

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 93 total)
1 2 3 … 5 6 7
  • Author
    Posts
  • May 7, 2011 at 9:10 am in reply to: HEC1050W #350761
    delahart
    Participant

    Re: HEC1050W

    Thanks Bazza,
    I searched on connect but didn,t find it.
    Del.

    February 14, 2011 at 8:32 pm in reply to: WAA28161GB/07 Paddles. #344501
    delahart
    Participant

    Re: WAA28161GB/07 Paddles.

    I do keep getting e-mails from chinese companies offering to supply any plastic parts, perhaps they could make some or maybe thats how
    e-spares have stock ❓ ❓

    February 14, 2011 at 7:08 pm in reply to: WAA28161GB/07 Paddles. #344499
    delahart
    Participant

    Re: WAA28161GB/07 Paddles.

    Phoned App Care, advised not available separately from the complete assy.
    Del.

    February 12, 2011 at 11:46 pm in reply to: WAA28161GB/07 Paddles. #344496
    delahart
    Participant

    Re: WAA28161GB/07 Paddles.

    That was going to be my next step, just wondered if anyone knew.
    Thanks,
    Delahart.

    February 11, 2011 at 6:08 pm in reply to: Bosch sealed drum WAA24270 #278393
    delahart
    Participant

    Re: Bosch sealed drum WAA24270

    Further to this thread does anyone know if the drum paddles are available as I need one for a WAA28161GB/07. They are not shown on the Bosch diagram but when I advised customer she is certain that her supplier got her one when one came off before!
    Delahart.

    January 31, 2011 at 6:01 pm in reply to: Bosch WTE86304GB Starts and stops. #343091
    delahart
    Participant

    Re: Bosch WTE86304GB Starts and stops.

    Back in workshop, so supply good. Am sending board to QER as they might be able to find faulty component on board.
    Del.

    January 31, 2011 at 4:23 pm in reply to: Bosch WTE86304GB Starts and stops. #343089
    delahart
    Participant

    Re: Bosch WTE86304GB Starts and stops.

    Thats what I was afraid of, pricey.
    Thanks,
    Del.

    January 31, 2011 at 3:29 pm in reply to: Bosch WTE86304GB Starts and stops. #343087
    delahart
    Participant

    Re: Bosch WTE86304GB Starts and stops.

    No goes completely dead for approximately 2 seconds then power is restored ready to be restarted.

    January 31, 2011 at 3:21 pm in reply to: Bosch WTE86304GB Starts and stops. #343085
    delahart
    Participant

    Re: Bosch WTE86304GB Starts and stops.

    Yes it flashes regularly when the power is restored as it would waiting for it to be started again.

    January 31, 2011 at 2:23 pm in reply to: Bosch WTE86304GB Starts and stops. #343083
    delahart
    Participant

    Re: Bosch WTE86304GB Starts and stops.

    Hi Martin,
    Thanks for your reply, but the machine cuts out as soon as the programme starts. When the start button is touched I can hear a relay switching and the machine fires up for approx 1 second and then it turns off so there is no time for any fault to be displayed as it then comes on again as if a programme has not been set. It does not even run for long enough for it to check the circuits. As I said disconnecting the components makes no difference to the fault. If one of the components was causing the fault, with it disconnected I should expect it then to run and display a fault condition, if that makes any sense. Thats why I thought it may be board? I just wondered if anyone had encountered this before.
    Del.

    January 28, 2011 at 9:52 am in reply to: Hoover HNMF2805A-80 #342721
    delahart
    Participant

    Re: Hoover HNMF2805A-80

    Hi,
    If you can send to derekhart322@btinternet.com that’ll be good thanks,
    Del.

    January 17, 2011 at 8:12 pm in reply to: Hotpoint FFA61 Fridge temperature. #341528
    delahart
    Participant

    Re: Hotpoint FFA61 Fridge temperature.

    Good question.
    I haven’t been to see it yet so no serial numbers. Can you advise on both types so I know what to look for?
    Many thanks,
    Del.

    November 17, 2010 at 11:11 pm in reply to: Hoover VHV 380-80 aborts programme. #336139
    delahart
    Participant

    Re: Hoover VHV 380-80 aborts programme.

    Hi,
    I have just had a Hoover VHV380 repaired under warranty. As it is an autosense drier it monitors the components for the first run of the cycle, before starting the main programme. The one I had then aborted and the heater turned out to be open circuit, so I guess that is probably your problem. Hope that helps,
    Delahart.

    November 17, 2010 at 11:00 pm in reply to: Hotpoint WD64 spin on dry. #336224
    delahart
    Participant

    Re: Hotpoint WD64 spin on dry.

    Thanks for that info. I guess I don’t usually sit and watch them for long as a rule, so thats good news. Need a bit of that.
    Del.

    October 26, 2010 at 10:36 am in reply to: Belling IDW603 Integrated D/W Hinges #332784
    delahart
    Participant

    Re: Belling IDW603 Integrated D/W Hinges

    Hi,
    Thanks for the info, spot on with the cords.
    Delahart.

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 93 total)
1 2 3 … 5 6 7