digital

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 36 total)
  • Author
    Posts
  • in reply to: Hotpoint FDL dispenser doesn’t open #470739
    digital
    Participant

    Thanks. Where to start?

    in reply to: Hotpoint FDL dispenser doesn’t open #470737
    digital
    Participant

    Doh!!! FDL570.

    in reply to: Bosch MBS533BS0B double built in oven installation #457138
    digital
    Participant

    Re: Bosch MBS533BS0B double built in oven installation

    Thanks. I did, and the installation sheet I have here is different from the one you have. There’s nothing in any of the literature that came with the oven which refers to the blocks. They’re in the bin now!

    in reply to: Hotpoint BWM129 1200 spin 5kg errors and noises #452063
    digital
    Participant

    Re: Hotpoint BWM129 1200 spin 5kg errors and noises

    Thanks. As you say, it looks like a new machine.

    in reply to: Bosch WFX2467GB detergent drawer #448423
    digital
    Participant

    Re: Bosch WFX2467GB detergent drawer

    Thanks. That’s the part number I searched for originally and it came back as ‘RS59273’ on Ransom Spares. Is there any way to ensure that I get exactly the tray I want to replace?

    in reply to: Bosch WFX2467GB detergent drawer #448421
    digital
    Participant

    Re: Bosch WFX2467GB detergent drawer

    Apologies, I should have included all that originally.

    ENR: WFX2467GB/10
    FD: 8410 601465
    Original drawer: FBW K10 5500 002 706
    Replacement drawer: FBW K11 5500002706

    in reply to: Bosch Exxcel 1200 Express poor spin #437280
    digital
    Participant

    Re: Bosch Exxcel 1200 Express poor spin

    Thanks.

    Water in the house was turned off while we were away but someone came round to check the house each week and they turned the water on while they were there so they could use the toilet. It was also turned on for a day after our return before we used the machine.

    I checked the hoses were clear by removing them where possible, and squashing them along their length where it was not.

    The outlet pipe is hooked over the top of the waste pipe and not pushed down into it.

    I’ll do the rinse check when the current load has finished. In the meantime, is there any other possible cause for the problem?

    in reply to: Bosch Exxcel 1200 Express poor spin #437278
    digital
    Participant

    Re: Bosch Exxcel 1200 Express poor spin

    I’ve tried to ignore this problem over the past several months but the operator is becoming less and less happy. She wants it fixed!

    All of the internal and external hoses are clear, and the spin seems to be up to speed.

    The only other oddity I have noticed is that, after being away for three weeks, we came back to a machine with a lot of water in the drum. Not up to the door, but visibly covering the bottom. Could it be that the water inlet valve has become lazy and is letting water through when it should be closed? Could it be partially opening during a spin?

    in reply to: Bosch Exxcel 1200 Express poor spin #437277
    digital
    Participant

    Re: Bosch Exxcel 1200 Express poor spin

    Thanks, I’ll have a look.

    in reply to: Bosch Exxcel 1200 Express poor spin #437275
    digital
    Participant

    Re: Bosch Exxcel 1200 Express poor spin

    Thanks for the responses.

    The brushes were replaced a couple of years ago and the pump trap/filter is clear. I’ll check that water can exit freely. The drain hose is hooked over an open waste pipe so any blockage must be in the hose itself (there’s no water on the floor!).

    in reply to: Bosch Exxcel 1200 Express poor spin #437272
    digital
    Participant

    Re: Bosch Exxcel 1200 Express poor spin

    Thanks for the suggestion: I haven’t, only the impeller housing through the removable access at front, bottom right.

    Where would I find the filter?

    in reply to: New World NW60F oven door hinge #415393
    digital
    Participant

    Re: New World NW60F oven door hinge

    The oven is away from home so I can’t see how the hinges might be replaced before I set off. Any helpful hints would be appreciated!

    in reply to: New World NW60F oven door hinge #415392
    digital
    Participant

    Re: New World NW60F oven door hinge

    Thanks. Found it at GDHAOnline with the help of the part number.

    in reply to: Bosch Exxcel 1200 Express overfilling #407139
    digital
    Participant

    Re: Bosch Exxcel 1200 Express overfilling

    Well, after a good deal of trouble removing the screw next to the detergent drawer to release the front panel, I’ve replaced the door seal!

    However, despite releasing and blowing through the thin black pipe which connects the drum assembly to the white plastic drain hose assembly at the top rear right of the machine, releasing and blowing bubbles through the black pipe with the longitudinal ribbing which connects to the white plastic assembly at the top front right and blowing bubbles through the drain pipe which extends from the bottom front right of the machine, there’s still no drum movement.

    If I set the machine to the rinse programme, the drum fills with water, there are double timer-type clicks every 30 seconds without any movement anywhere, and then the water is pumped out.

    Have I missed a blockage in a pipe somewhere or is there another fault?

    in reply to: Bosch Exxcel 1200 Express overfilling #407138
    digital
    Participant

    Re: Bosch Exxcel 1200 Express overfilling

    I’m sure it’s going to be fun! Many thanks for your help.

Viewing 15 posts - 1 through 15 (of 36 total)