Forum Replies Created
-
Posts
-
Re: Miele G653SCV1 parts info needed
Hi John
The 1 in the model number is an I 😉
Base picture enclosed, let me know which position numbers you need the part numbers for.
Don
Re: Zanussi ZBF360 oven door handle
Hi
Well it appears you have all the right pieces for the job :tup: the screws must have been modified at some stage.
Don
Re: Zanussi ZBF360 oven door handle
Hi
Door handle part number 3554052021 and the fixing screws 3543232015. Could be worth checking first of all your packaging to make sure you have the correct parts.
Don
Re: Arrow Cooker has died.
Hi Stuart
As this is a public forum I’ve deleted your mobile number from your post purely to protect you from any potential spurious calls. You never know these days who might be looking in on posts.
You can always use the sites private messaging system if you need to contact anyone, it’s much safer 😉
Don
Re: Zanussi ZBF360 oven door handle
Hi
PNC number starting 949 needed to identify correct model please as there are 12 different versions.
Don
Re: Newhome Envoy battery location please!
Hi
Could be in the storage compartment if your model has one or have seen them sometimes behind a little flap on the hinge side of the main oven door along the bottom edge.
HTH 🙂Don
Re: Whats the best product to clean a smelly washing machine
Hi
The following articles are all smelly machine related from the soap dispenser to the door seal and beyond.
http://www.ukwhitegoods.co.uk/help/clea … hines.html
http://www.ukwhitegoods.co.uk/help/clea … arks-.htmlhttp://www.ukwhitegoods.co.uk/help/clea … -wash.html
http://www.ukwhitegoods.co.uk/help/clea … -wash.html
http://www.ukwhitegoods.co.uk/help/clea … awers.html
HTH 🙂
Don
Re: Zanussi jockey pulley
iadom wrote:Cancel last post, found new part number, it’s 125012401. 8)
Jim.
Which is discontinued at Distri.
Don
Re: Zanussi jockey pulley
Afternoon Jim
Pulley is still listed on Procorner as part no. 1280003003 which supercedes to 1258222007 which is in stock at Connect and Distriparts.
Don
Re: Hoover for Rental Tenants
Hi Raj
I would put a Henry cylinder in there, well made and yes it will stand up to some rough treatment. Cost wise about the £90 mark.
If you put a £50 odd machine it will not last long at all.
HTH 🙂
Don
Re: Miele WT2780 motor
Hi Seamy
Supplied as motor complete you would get positions 1-9 when you order motor.
Don
