Forum Replies Created
-
Posts
-
Re: Heating problem
Hi GSF
Moved to European forum 😉
Can you post up the model number please, the more info the better?
You can upload pictures to the site by using one of the free hosting sites like photobucket, tinypic or Image Shack. This will help a lot in trying to identify your machine.
HTH 🙂
Don
Re: 6ft-ish / 170-190cm upright freezers – NOT FROST FREE
Hi gandh1
Welcome to the dark side 🙂
The only one I can come up with is the Bosch GSD34N01 climate class SN. The only issue you may have is if the temperature in the lean to goes down below freezing for a sustained period of time.
Don
Re: In search of the fourth cord
Just out of curiosity what was the reason for locking this one about the Neff hob I thought the last word had been said.
Re: Prestige microwave
Hi Steven
The only place I have seen Prestige branded products is in Comet. Whether they have the exclusivity on the brand I don`t know but http://www.cometspares.co.uk/ might be a good place to start. helo_75 might know more 😉
HTH 🙂Don
Re: Tricity bendix wdr1030 bearing/seal kit
Hi Simon
It has a split tub according to Procorner.
Tub rear 1320639204
Bearings 1245458003, 1245459001 bearing seal 50095515008
HTH 🙂
Don
Re: freezer needed
Hi
I don`t know of any domestic appliance that would fall into your spec i`m afraid, so it does looks like a semi or commercial machine you would be after.
As for Ebay I would always be a little cautious about purchasing electrical appliances from there unless you have someone inspect it first.
There are quite a few suppliers listed on Google which may be able to help.
HTH 🙂Don
Re: New Dishwasher Recommendations please
gandh1 wrote:
one thing i noted was you listed a bosch sgs45c08, which is a satin silver model.this is a very light silver, compared to other manufacturers silvers, so it would be very worthwhile seeing it in the flesh before you purchase, which is obviously, where independents are even better over the internet :D:D:D
He changed his mind and is now going for the SMS63E02 😉
Re: freezer needed
Hi
Reading the description of your requirements I assume you are looking for a commercial appliance?
Don
Re: Tricity Cooker 1637
Hi Phidom
You could try Kitchen Economy they recon and sell electric cookers on to the trade they may be able to supply you a pan
for you.Don
Re: How noisy is a Frost Free.fridge?
Gerard wrote:Stick or twist? Head says wait, heart says go Siemens if in stock. What do you do? Choices 😕
Wait if you can, you won`t regret it.
DonRe: Hotpoint WM inlet hose
Ordered for you Jim, I`ll let you know the quantity when they arrive in and the cost of postage.
Don
Re: hotpoint wma42p control pcb interchangeability
gandh1
You have been asked on more than one occasion to apply for trade access.
If you have trade access then please direct your enquiry to the relevant forum.
Quite a lot of the engineers on the trade side will not venture into the public side for one reason or another, so you may not get the answer you are looking for.
Not only that but giving trade advice in the public forums is not good practice as all sorts of safety and competence issues arise.
DonRe: Hotpoint WM inlet hose
Hi Jim
Connect are showing that part no. in stock. I can order one if you like and mail order it to you, price inc postage and VAT will be £8.35.
Don
Re: Replacing an Indesit APM6855 Fridge-Freezer – help neede
Hi Liz
I`m assuming by the model no. you have a Hygena and not an Indesit?
Most manufacturers produce built in refrigeration that will fit in your housing. The only thing to remember is the split on the existing machine is 50:50 fridge to freezer, you will need this to ensure that your existing wooden doors will fit.lizgod wrote:
I think the cabinet dimensions are: 179 – 181cm height, 57 cm depth and I’m not sure on the width.
If you measure the internal height I think you will find it`s around 177cm. In which case the following recommendation will be correct 😉
Our best seller in your size is the Neff K4204 which is the right size and split.HTH 🙂
Don
