Forum Replies Created
-
Posts
-
Re: Dishwasher Recommendation
Hi goooba
I would go straight for the Neff S54E53 it comes in on budget has good spec and has a two year warranty to boot.
Don
Best solution for keeping stainless steel clean and looking good Chromol 500mlstainless steel cleanerRe: Need to buy a new Washer-Dryer…Help I’m clueless!!!
Hi
There is this integrated version of the WD1408. It does has a reduced capacity of 5kg though to allow the machine to recess further so the timber door will then end up flush with the existing run.
HTH
Don
Re: need to buy a new Combi microwave Oven BUT need to know
Hi
Engineers in the field won`t see a model until it`s at least a year old due to the manufacturers guarantee by that time the model has been replaced by a newer version and the spec and materials could have changed too.
I would have thought that a polite call to the Sharp Consumer Sales Enquiries on 0800 262 958. I`m sure if you explained the situation one of their own tech guys may be able to help.
Failing that then try Panasonic on 01344 862444.
HTH
Don
Re: Stay clean liners – removing
Guest wrote:I shall have to take my baking trays into our local dealer and see if they will fit. The brochures give oven dimensions but I’m not sure if that takes into account the liners and rack support system.
A good idea taking baking trays with you at least you will know for sure that they will fit. Normally when the manufacturers quote oven capacities it is usually the usable space.
Let us know the outcome, you never know someone else may have the same questions at a later date.
Don
Re: Stay clean liners – removing
Hi
If you were to remove the liners, where and how would the wire shelves mount? The shelf racks are attached to the liners either by the ladder type of rack or the shelf grooves are part of the liner.
There may be technical issues as well, which someone else may be able to chip in with 😉
If you can post back whether it`s gas/ electric, freestanding / built in and any measurement reuirements, I`ll try and help outHTH
Don
Re: Is it possible ?
Hi
You can fit a freestanding machine into the housing however you will not find a large choice. Make sure you have adequate ventilation around the appliance to to ensure good running. If you can post back with the internal cabinet measurements I`ll have a go as what you could replace current machine with.
HTH
Don
Re: Replacing built-in fridge freezer ?
swayzak wrote:
Many thanks.I’m currently trying to establish the model – I fear that the internal sticker (as Whirlpool informed me) is no longer present therefore may have to resort to photographs !
Will post back.
Physical dimensions as well please if you can 😉Don
Re: Replacing built-in fridge freezer ?
Hi swayzac
Built in fridge freezers generally come in two door sizes 50 / 50 split and a 70 / 30 split. As far as the internal timber cabinet measure goes they are normally 55cm wide. The only thing to check would be the height of the appliance itself as they do vary a little.
If you can post back the make and model of your existing machine I may be able to come up with a replacement for you.
HTH
Don
Re: Warranty cards
Looks like we were running an old version of Adobe. Just downloaded version 8 and everything now working fine.
Sorted :tup:
Thanks anyway.
Don
Re: Warranty cards
kwatt wrote:
Downloadable hereK.
When I try to download this pdf version I get “the file is damaged and could not be repaired” any ideas ?
Don
Re: John Lewis Tumble Dryer going back
Hi hbrac
Yep good machine, two year warranty and hot on spec as well.
Don
Re: Typhoon Dream House
adamhornsby wrote:
must be Sebo made, as far as i know, only Sebo models fold flat like that
Hi AdamThe Miele is 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} their own product. It is made in Germany like the Sebo though 😉
DonRe: manual for belling cooker 4925ss
Hi
I can`t find any reference to that model number, but there is a 925 Farmhouse range cooker. Either way it will be a Belling job http://www.belling.co.uk/ I`m afraid.
HTH
Don
