don

Forum Replies Created

Viewing 15 posts - 751 through 765 (of 8,041 total)
  • Author
    Posts
  • in reply to: vax 6131t #473039
    don
    Moderator

    From Ebay, bottom one by any chance?

    Don

    in reply to: vax 6131t #473037
    don
    Moderator

    I get this from Connect don’t know if that’s correct?

    in reply to: Built in microwave/cooker hood AVM955 failure #472699
    don
    Moderator

    jessicabraham wrote:I am looking for a good microwave. Guide me to get one.

    Your IP address suggests you are in India, best to start your search more local to you.

    Don

    in reply to: Smeg SUK62MFX5 Ignition Block Replacement #472970
    don
    Moderator

    Hi

    While this maybe a DIY fix for some we would not recommend it as you will have to disturb to some degree gas couplings in order to access the part needed. Our forum rules do not allow us to give advice on gas or dual fuel cookers. A fuller explanation can be found here we will always direct enquiries like yours to a registered Gas Safe engineer.

    Don

    in reply to: New energy labels #472903
    don
    Moderator

    I am hoping it will make manufacturers wake up to what they have been getting away with for many years. I’m not going to hold my breath.

    Don

    in reply to: Service Site Domestic Appliances (Service Site LTD). #472923
    don
    Moderator

    There is a good thread here with some very recent input.

    I’ll leave you to have a read and make your own mind up 😉

    Don

    don
    Moderator

    electrofix wrote:

    LOL

    are you doing a discount for bulk orders ?

    Dave

    For you Dave? Of course 🙂

    Don

    don
    Moderator

    Worth a punt if you want it before Christmas 😉

    Don

    don
    Moderator

    mrfixxer wrote:wanted this one but out of stock 5 year warranty

    https://www.currys.co.uk/gbuk/household-appliances/dishwashing/dishwashers/smeg-did13e2-full-size-fully-integrated-dishwasher-10197647-pdt.html?cmpid=email-when-back~acknowledgement~product-details~02112020

    Like a lot of product at the moment there is no stock available anywhere. Spares are starting to get short in some areas as well.

    You either place a back order email with Curry’s, see if anyone else has it or pick something else which is in stock. The only problem with the last option is it may be something you you don’t like, the stock situation is not going to improve before the end of March next year.

    I’m going to start stocking and selling Marigold gloves

    Don

    in reply to: New energy labels #472899
    don
    Moderator

    It’s on a Hotpoint washer dryer. When the old label was around they only rated the wash side on the label, real dodgy if you ask me! Now it’s wash and dry being rated 😮

    Don

    in reply to: Unable to change settings… #472869
    don
    Moderator

    That’s going well for 12 years odd. S is the salt warning light and the snow flake is it needs rinse aid. Both are needed for best wash results and to keep the regeneration system in good working order.

    I would be chopping the dishwasher in for another slimline built in or remove it, cut through the plinth and install a freestanding machine but you will lose the integrated look.

    Don

    in reply to: Unable to change settings… #472867
    don
    Moderator

    The model number and 12nc on Whirlpool dishwashers is usually found on a white label along the door edge.

    Don

    in reply to: Phllips FC5828/61 #472816
    don
    Moderator

    electrofix wrote:there is a fuse on that board
    has it gone ?

    Dave

    One end of it does look blackened 😉

    Don

    don
    Moderator

    If you are DIY minded then you can achieve it. The instructions on most dishwashers are quite detailed. If all else fails then a kitchen fitter is required.

    Don

    in reply to: Dyson DC18 hose #472777
    don
    Moderator

    Vacuum cleaner hoses come in a variety of diameters, best way of doing it would be to take your hose into a local vacuum repair shop and ask the question. The DC18 is long discontinued and there are no generic hoses available.

    The part number for the hose is 91169404, Googling it brings up a couple of possibilities of a new one and there is an Ebay entry for a used one. The DC18 is about fourteen years old now and is still worth spending a few pounds on as it’s much better than the current crop of machines.

    Don [h=1][/h]

Viewing 15 posts - 751 through 765 (of 8,041 total)