funkyboogy

Forum Replies Created

Viewing 15 posts - 2,296 through 2,310 (of 2,407 total)
  • Author
    Posts
  • in reply to: zan fle1416w #174693
    funkyboogy
    Participant

    Re: zan fle1416w

    E71 FAULT…
    fault guide states ” ntc wash sensor faulty, voltage not within limits =short circuit or open…

    as with all zanussi w/m,s its probaly the pcb thats faulty, but may be worth trying ntc, or looking for loose wires…
    cheers ally

    in reply to: zan fle1416w #174691
    funkyboogy
    Participant

    Re: zan fle1416w

    is it the model with the 8 lights running down the right hand side of control panel….if so what lights are on,,from 1st light at top tp 8th at bottom…
    cheers ally

    in reply to: Got a few bob to spend? #174605
    funkyboogy
    Participant

    Re: Got a few bob to spend?

    as del boy always says
    “what a plonker”

    in reply to: Hotpoint/Bosch dishwasher ext hose? #174626
    funkyboogy
    Participant

    Re: Hotpoint/Bosch dishwasher ext hose?

    there for sticking to the bottom of your tool box of-course,
    with the sealant/superglue/grease ? thats burst,
    the trick with this kind of job is not to let the customer see all these little extra parts, as they will want them fitted,
    ally

    in reply to: stoves part no req #174489
    funkyboogy
    Participant

    Re: stoves part no req

    cheers guys ,will update
    ally

    in reply to: Zanussi FJS1397W #174542
    funkyboogy
    Participant

    Re: Zanussi FJS1397W

    Motor tach fault,
    had this a few times,
    ally

    in reply to: “Your Connections has expired!” #174400
    funkyboogy
    Participant

    Re: “Your Connections has expired!”

    thanks again guys,
    what about parts centre-wash-vac, nobody seems to mention them ??.
    cheers ally

    in reply to: “Your Connections has expired!” #174398
    funkyboogy
    Participant

    Re: “Your Connections has expired!”

    cheers,
    will give them a look…
    how do you guys find/source parts out on the field,
    is it a call back to office, or can you load up laptop /pda etc???
    ally

    in reply to: “Your Connections has expired!” #174396
    funkyboogy
    Participant

    Re: “Your Connections has expired!”

    cheers greg, jsut dropped them an e/mail..
    think i will start a new post on what suppliers are best for what ???
    ally

    in reply to: “Your Connections has expired!” #174394
    funkyboogy
    Participant

    Re: “Your Connections has expired!”

    any body got contact details for connect, i want to open an account,
    ps any other good suppliers out their that are worth a look;;
    cheers ally

    in reply to: indesit w143s uk #173947
    funkyboogy
    Participant

    Re: indesit w143s uk

    cheers for replys
    will update as and when
    ally

    in reply to: indesit w143s uk #173944
    funkyboogy
    Participant

    Re: indesit w143s uk

    240 TO MAINS FILTER..
    live,s to door switch, no neutral to d/sw..
    step timer did look as it had soap marks on it..strange?/
    sn 205308445.
    cheers ally

    in reply to: Tool tip. #172766
    funkyboogy
    Participant

    Re: Tool tip.

    long nose locking pliers (halfords £8), work like mole grips, great for removing those sump hose clips etc. once pliers are locked in place clip then stays there,frees up both hands.

    in reply to: How do you drain off a flooded WMA? #173518
    funkyboogy
    Participant

    Re: How do you drain off a flooded WMA?

    what if circ motor and pump are combined ?

    in reply to: Indesit Dishwasher IDL500UK2 #173461
    funkyboogy
    Participant

    Re: Indesit Dishwasher IDL500UK2

    YEH HAD THE SAME FAULT RECENTLY,FITTED TIMER WORKED OK

Viewing 15 posts - 2,296 through 2,310 (of 2,407 total)