funkyboogy

Forum Replies Created

Viewing 15 posts - 1,156 through 1,170 (of 2,407 total)
  • Author
    Posts
  • in reply to: zanussi ZWF16281W 92500300 #346330
    funkyboogy
    Participant

    Re: zanussi ZWF16281W 92500300

    havent done any of the above ? ..

    wasnt myself at was at appliance – dont think it was showing any errors ? will check

    havent doen reset either – will do ..

    have you got service man , if so would be apprieciated

    admin@atsscotland.co.uk

    cheers ally

    in reply to: Hotpoint ff 200e #346103
    funkyboogy
    Participant

    Re: Hotpoint ff 200e

    cheers worked a treat

    ally

    in reply to: hoover fridgefreezer hnmf282805a #346211
    funkyboogy
    Participant

    Re: hoover fridgefreezer hnmf282805a

    where did you send mate – as i dont have

    admin@atsscotland.co.uk

    cheers

    in reply to: Smeg slim line dishwasher dwf409 ss #346098
    funkyboogy
    Participant

    Re: Smeg slim line dishwasher dwf409 ss

    its a goner mate … pump was ok – took it of not blocked wired it up tp my trusty 240 mains cable and it ran ok …

    rest of appliance was in a bit of a state as well ..

    now entering the world of weeee ..

    ally

    in reply to: WEEE or not?? #346202
    funkyboogy
    Participant

    Re: WEEE or not??

    re wee …

    i bought a sat nav last night at currys – oops dont know if i should mention retailer ..

    any way they had a sign stating that they would recycle my old sat nav

    bearing in mind what john said at meeting ie 250 quid per ton of electronic waste ..

    not abad idea ..

    in reply to: Hotpoint ff 200e #346102
    funkyboogy
    Participant

    Re: Hotpoint ff 200e

    cheers will try ..

    ally

    in reply to: Smeg slim line dishwasher dwf409 ss #346096
    funkyboogy
    Participant

    Re: Smeg slim line dishwasher dwf409 ss

    hi mark – as per 1st post been checked ..

    bit of a weird fault – good news is its an insurance job and a couple of parts are nla – yipee

    in reply to: Nothing to do……but. #346090
    funkyboogy
    Participant

    Re: Nothing to do……but.

    customers can wiat untill saturday … out of the question for me ?

    no prizes for the nationality of the last 3 that went to bed ..

    lol ally

    in reply to: Redkite Appliances #346033
    funkyboogy
    Participant

    Re: Redkite Appliances

    one of my mates deals with them – has ordered stuff but hasnt been able to contact them for 3 days . livingston branch

    ally

    in reply to: Safety first ?? nah, let’s film it ! #345948
    funkyboogy
    Participant

    Re: Safety first ?? nah, let’s film it !

    you would be suprised how many capable people are repairing there own appliance –
    some more qualified than ourselfs ..
    ie degrees in electronics etc ..

    but there are alot of stupid people as-well pitty they dont all video themselfs

    got to admit that video was hillarios ..video looks- sounds american – they are a crazy breed and will generally try to repair things themselfs .

    ally

    in reply to: zanussi pcb #345990
    funkyboogy
    Participant

    Re: zanussi pcb

    on connect it says not config, how old is it ?
    you should be able to config yourself

    ally

    in reply to: SAMSUNG single oven #345918
    funkyboogy
    Participant

    Re: SAMSUNG single oven

    full control panel required for this

    choice of 2 . only way to tell diff is the connector box 1 has 9pins the other has 12 ..

    if you can tell me that i could get part no … for you

    cheers ..

    ps pm me if i dont get back to you – as i will probaly forget ?

    in reply to: *** Important *** WTA /UKW Meeting Fri 25th Feb #342776
    funkyboogy
    Participant

    Re: *** Important *** WTA /UKW Meeting Fri 25th Feb

    dont know if its just me – but i get the feeling the wta/ukw meetings are carrying a lot of clout now ..

    last couple ive been to i got the feeling that some in the room were just paying lip service and maybe thought ukw = who ?

    probaly a lot to do with oft etc , but johns speach on amica and service levels have maybe also turned a few heads as to what could be achievable by using a good network and by offering the engineer a good rate.

    more trade stands , would be good for maybe the likes of A.C.T to do a small refresher course on earthloop etc for anyone who wants to catch up with using the latest testers etc , maybe even martin could do this ? ..

    this meeting for me had to the best so far ,
    actknowledgements to all the ukw/wta satff who put a lot of their own time into making meeting happen …

    and not forgetting the engineer who probally penciled of 2-3 days of work to come to meeting as well …

    ally

    in reply to: Zanussi washing machine bung – Urgent! #345640
    funkyboogy
    Participant

    Re: Zanussi washing machine bung – Urgent!

    i wouldnt rely on what r/c system says fits , you best getting a tds disk … we had a mare with zanussi parts on r/c system ..

    ally

    in reply to: Zanussi washing machine bung – Urgent! #345638
    funkyboogy
    Participant

    Re: Zanussi washing machine bung – Urgent!

    while we are on the zanussi bung subject , i just done rear tub etc
    but didnt receive the little bag with the bungs , now im needn bung and disc that fits in thermostat hole in rear tub ..

    there was nothing in the box .. appliance all ready to go apart from missing bung

    anyone got a part no . used to get a little bag with all things required ..

    cheers ally

Viewing 15 posts - 1,156 through 1,170 (of 2,407 total)