garn

Forum Replies Created

Viewing 15 posts - 361 through 375 (of 433 total)
  • Author
    Posts
  • in reply to: Oven cleaner #292406
    garn
    Participant

    Re: Oven cleaner

    electeolux ovencleaner is prety good

    but my mrs useses a kit from tesco you drop the oven shelves in a large clear bag ands some stuff to and leaves it a couple of hours rinces it off and its good for a year.

    or you can try using a karacher hand steamer its works very well on appliances

    in reply to: LUXOR #291395
    garn
    Participant

    Re: LUXOR

    garn wrote:IV NEVER SEEN ONE OF THESE BEFORE THERE IN THE BARGIN BASEMENT SECTION.

    OR NEVER SEEN A POST ON 1

    ANY PROGNOSIS ❓

    JUST FOUND THE LAST THREAD IN THE FORUMS

    SAY NO MORE….

    in reply to: HOTPOINT WMA-WF REARHALFS #291110
    garn
    Participant

    Re: HOTPOINT WMA-WF REARHALFS

    THANKS MATE I THOUGHT AS MUCH
    I HAVE THE 35MM SPIDERS IN STOCK

    JUST ON HALF STRIPING THIS ONE FARR LESS LOOM AND STUFF TO TAKE LOOSE 🙂

    THANKS PAUL…

    in reply to: DOOR BOOT LG WM16220FD #290482
    garn
    Participant

    helo_75 wrote:You do need to take the bezel off, and the front panel… very similar to a wma

    you may have to take one,maybe both weights off and have the strength of an ox

    not hard, just time consuming

    chears mate
    my bro is bringing the thing up from Taunton, Somerset on the back of his mk2 landrover.

    long way for a fix :rolls:

    ta paul…

    in reply to: DOOR BOOT LG WM16220FD #290480
    garn
    Participant

    Re: DOOR BOOT LG WM16220FD

    cornwell40 wrote:Funnily enough I have that model in to recon at the mo with a s***ty boot.
    Was going to try my vast array to see if another boot will at least fit, otherwise its the 40 odd quid root (yah boo hiss).
    TC

    i doubt very much if there’s a match out i think there so pricey because they don’t sell many ❓ can the boot be changed from the front of the appliance or is it one of these that the tub has to come out.

    thanks paul…

    in reply to: service M685W #290324
    garn
    Participant

    Re: service M685W

    ok thanks butty
    paul..

    in reply to: New way to replace Bosch brushes. #289743
    garn
    Participant

    Re: New way to replace Bosch brushes.

    LJDomestics wrote:Im gonna place a ad in the lancashire post! brushes fitted from a tenner, see what calls i get. 8)

    WELL ITS GOING TO COST YOU ATLEAST £62.00 TO PUT AN ADD IN YOUR LOCAL RAG

    BY THE TIME YOU COVER YOUR OVEHEADS FOR YOUR BUISNESS I RECON YOU WILL HAVE TO GHANGE AT LEAST 20 SETS BEFORE YOU BREAK EVEN.

    YOU BETTER TAKE A FLASK AND SARNIES WITH YOU JUST TO KEEP YOUR COSTS DOWN.

    NO DINING OUT FOR LUNCH THAT WEEK 🙂

    PAUL… 😉

    in reply to: New way to replace Bosch brushes. #289740
    garn
    Participant

    Re: New way to replace Bosch brushes.

    the guy looks similar to the guy who’s in the hotpoint drum change video
    that you get with the drum removal tool 8)
    i think his name was martin to 😉

    in reply to: New way to replace Bosch brushes. #289738
    garn
    Participant

    Re: New way to replace Bosch brushes.

    its like being back in the school yard reading theses threads
    all IL say that there is half a dozen members who go out of there way to help other engineers or members of the public.

    iv never met any of you but i have plenty of respect

    this is the only professional site on the Internet
    through the years iv been reading kens posts and have up most respect
    he has so much knowledge about the world wide domestic appliance business and hands on repairs IL always thought this guy must be from technical development (IE he must be building them)
    but he actually been out there and got his finger nails dirty

    my self I’m proud to be a member of united kingdom white goods trade association
    and some people should have more respect.
    by the way ken you need to re set this ➡ http://www.youtube.com/watch?v=p0kJT1HY … re=related

    keep your chin up matey

    garn…

    in reply to: Name your poison! #290289
    garn
    Participant

    Re: Name your poison!

    Mast Jagermieister AG Wolfenbuttel Germany Seit1870.
    Ice cold From The Fridge 35{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} 🙂

    if There Is A Yank On Hear He will know What im Talking About
    Try A Couple Of Shots freezing cold buy it from any offflicence

    garn 😉

    in reply to: letting company owe me #290030
    garn
    Participant

    Re: letting company owe me

    You Can Take A County Court Judgement on line For £30.00 Or If Its Under £100.00 it Free.As Long As You have Some Documentation For The Relevant Contract Or Sale or job.

    It will be A Case Of A Meeting With A circuit Judge Between You And The Culprit which will Take About Thirty Minutes.

    if the Culprit Doesn’t Turn up The Judgement Will Be Awarded In Your Favor :wink:.

    hence you have a county court judgement in your favor 😉

    this doesn’t mean your going to get your £500.00 Plus costs YET or at all :rolls:.

    I would Say The First Step Would Be To Write To The Culprit Strait Away if The Default has been A while Send him Four Letters Strait Off the First nice and Polite And The Third & Fourth Threatening litigation
    Make Sure You Post Recorded DeliveryHe Must Sign and You got a Bit of Evidence 🙂

    On The Other Hand You Can Employ a Bailiff or Collections Agency To recover Your Money plus Costs As Long As The Judgement Is In Your Favor This Doest ant mean Your Going To get Your Cash.

    Bailiffs have Power But They have To Work of The Old Bylaws Which Most Of Them Don’t Know “They Tend To Do As they like.

    In To days Climate Or Just after The 2ND world War There’s A Term your Granny may have Spoke With Fear deters jail.
    There Was A Rule Past To Protect Defendant who has Defaulted But The General Public Are Not Aware Of This.
    example if You Owed moneys Or Haven’t Paid for Goods And Your In Dire Straits You Wouldn’t go To Jail Or Your Stuff be Lifted Poor People Who Made A Mistake Or There life Changed Through No Fault Of Their Own.

    NO bailiff can Enter Your Property to Recover Goods With Just A County Judgement he will have to have distress warrant signed by A judge and Enforced by To police men
    no Judge Is Going To give A Distress Warrant If There Is Kidd’s There Or for 500.00.

    but If The Bailiff calls Round To The Culprits Property and Knocks the door And Says Hello I’m Representing A collections Agency iv come hear to Day only to Take Some Details And To do an Inventory of goods

    and You Invite him In. there Usually so Polite at this Point the Minute he Leaves And Steps Out Of Your Door he has Every Rite To come back later when your not there and take your stuff inc the kiddies toys.

    as for a self repo your on a fine line

    On The Other Hand If The Culprit turns Round And Tells The bailiff On The doorstep that they want the judgement set a side or disputing the judgement or ask for a green form by law he has to carry it he fills it in and sends it back to court and there is another hearing that could cost up to £900.00for you or the culprit.if you don’t pursuit the judgement is set aside and the culprit is scotfree. or you begin the proses again
    if its for a lot of money you may get your distress warrant from a judge.
    hence the law is there to protect the plaintiff and the defendant.

    the only people who can enter a property without a distress warrant are
    gasmen firemen and most importantly the VATMAN

    and you must pay your utilities bills or a bailiff will collect £ or goods to the value with a distress warrant.

    AS FOR A SELF REPO YOUR ON A FINE LINE IF OU MANAGE TO HAVE INVITED ENTRY INTO THE PROPERTY YOU MAY BE ABLE TO RECOVER THE APPLIANCE BUT ONLY THAT PERTICULER ITEM THE MONEY WAS SECURED ON YOU CANT TAKE ANY OTHERGOODS TO THE VALIU SO IF YOUR WASHING MACHINE IS ONLY WORTH £50.00 NOW YOU CANT TAKE ANYTHING ELSE TO RECOVER YOUR £500.00
    MAKE SURE YOU HAVE A LETTER FOR THE CULPRIT AND ONE FOR THE COPS WHO THAY ARE BOUND TO PHONE AS LONG AS YOU TELL THEM THAT YOU HAVE HAD INVITED ENTRY AND YOU ARE RECOVERING GOODS SECURED IN LOO OF PAYMENT THEY HAVE TO LET YOU CARRY ON ITS A DOMETIC MATER.

    ON THE OTHERHAND YOU CAN SELL THE JUDGEMENT TO THE BAYLIFF FOR A NOCK DOWN PRICE AND HE WILL PESTERTHEM FOR A LONG TIME AND WHEN HE GETS FED UP HE WILL FLOG IT ON TO ANOTHER BAYLIFF AND IT COULD GO ON FOR THEM FOR UP TO SEVEN YEARS THEN THE CULPTIT IS NOT RESPOSEBLE ANY MORE AND THE DET IS LOST
    AND YOU CAN HAVE THE SATISFACTION OF THER CREDIT RATING BLACKED.


    I WOULD STRONGLY RECOMEND ANY ONE READING THIS INFO IS TO GO TO YOUR LOCAL LIBRARY AND STUDY YOUR SELF AND THOROUGHLY DIGEST THE LAW. BEFORE YOU ACT
    TO BOOKS YOU CANT TAKE OUT 1 THE LAW BY A BARISTOR QUEENS COUNSIL AND 2 READERS DIGEST THE LAW

    GARN…..

    in reply to: hotpoint WT761G KEEPS GOING INTO TEST MODE #289911
    garn
    Participant

    Re: hotpoint WT761G KEEPS GOING INTO TEST MODE

    failed to get it running 🙁

    in reply to: hotpoint WT761G KEEPS GOING INTO TEST MODE #289910
    garn
    Participant

    Re: hotpoint WT761G KEEPS GOING INTO TEST MODE

    Martin wrote:

    garn wrote:
    ANY IDEA BEFORE I GO THERE ❓

    If it keeps going into test mode it could be a duff module but check the full SP by referring to this link before venturing forth…. 😉

    thanks martin

    now my printer just packed in mondays it is to 😥

    in reply to: hotpoint WT761G KEEPS GOING INTO TEST MODE #289908
    garn
    Participant

    Re: hotpoint WT761G KEEPS GOING INTO TEST MODE

    THANKS BUTTY
    Any Idea where i can get this info to read and up date my software skills
    its seems just over the weekend iv had four ultimas in with screen or software problems all WT versions . 😳
    iv just purchased the new ind card reader I haven’t had the opportunity to use it yet.

    give me conventional engineering all day and IL be in my ELEMENT :rolls:

    ❓ how up to date is the ukwg fault code Guide book

    thanks paul

    in reply to: HPT WT960P. HPT WF?. HPT CTD80P. #289830
    garn
    Participant

    Re: HPT WT960P. HPT WF?. HPT CTD80P.

    ok thanks mate il break the news to him tomorrow x3 😉

Viewing 15 posts - 361 through 375 (of 433 total)