[garn]

Hi garn hear .
i Have The same Model as This appliance WKD28351gb/06 FD9510 WASHER DRYER ERROR 11?? been Trough the Error codes no info as above

but it pays to use the search button first as this came up .

I’m calling With the customer in the morning

Regurds Garn

[garn]

electrofix wrote:lock seems to come in parts

lock top seems to be item 89172

Dave

Thanks butty

[garn]

Yes iv Had 2 myself. you May have been partially thrown off your diagnosis. during inspection because the way is was functioning, il go through the nightmare of scenarios testing checking.

The behavior of the appliance its working sometimes.

Starts Pumps Works No blockage, Water fills, You Have drum rotation,

it starts washing mixing the clothes up with soap display is counting down, All of a sudden it stops in its tracks, between 3 and ten minutes into the wash cycle .

HA at this point all of a sudden all types diagnosis scenarios are going through your head:confused:

Ok Have A Quick Listen And look to see whether the soap generator circulation pump is working. restart cycle again.

Now before you go and remove the front face of the machine to check the heater and probe because they come into working anything between 3 and 10 minutes of the wash cycle and may stop because they could be faulty.

Get Your meter out and check the input voltage PLUG FLEX 240 volts

after me spending hours on the first appliance fault it took me hours to find this because it was partially working and stopping in its tracks .

Fault THE MACHINE will Spin empty fill Up with waster and start to mix the load ALL ON 237 VOLTS But it wont carry on

its was the blinking sealed plug breaking down not quite enough power to run it 237 volt is got to have 240 VOLTs also the 2nd appliance was the same fault and the plug was hot this time .

Hope this helps and save some time .
Garn
.

[garn]

Re: BUSH Range Cooker element?

Thanks ray They Supplied me the part numbe.r There out of stock.

BUSH EGO FAN ELEMENT 2000W 3 TURN 34130
BUSH BAUMATIC

THANKS Paul

[garn]

Re: indesit WIDXL126 fault code flashing?

iadom wrote:You did look in the KNOWN ERROR CODES thread I assume?

F06 door lock or wiring
i Did Jim Just couldn’t make it out its my age 😉

[garn]

Re: Bosch WAB Washing Mashine Error 16 ?

wow thanks again
Used the link information .
Off position.
Hold start.
To turns anticlockwise.
And release start button and turn switch to the off position.

Worked a Treat :tup:

[garn]

Re: SHOP Inquiry Please

Thanks k.
I’ll order it later

[garn]

Re: Samsung heat Pump dryer fan required

Thanks Don just email for information

1more Question. Is there a thread in the forum for violent and abusive customers
I’ve been attacredited 3 times in 4years.
1 last week. If you can send me a link
Paul

[garn]

Re: Samsung heat Pump dryer fan required

Thanks for the reply.
?F PARTS? NOT SURE WHO THEY ARE.

[garn]

Re: Samsung DV70F5E0HGW Tumble dryer

Thanks never seen 1 let alone work on one
Ta Paul

[garn]

Re: Samsung DV70F5E0HGW Tumble dryer

garn wrote:hi happy 2018 .
had a call this evening with a customer ERROR 5E on the screen UNABLE TO FIND WHAT THE CODE MEANS

THANKS GARN PS SAME MODEL AS ABOVE

does anyone know this fault code E5 please desperate

[garn]

Re: Samsung DV70F5E0HGW Tumble dryer

hi happy 2018 .
had a call this evening with a customer ERROR 5E on the screen UNABLE TO FIND WHAT THE CODE MEANS

THANKS GARN PS SAME MODEL AS ABOVE

[garn]

Re: Hotpoint condenser pump which 1 part number

Hear it is Amazon
https://goo.gl/images/t4KmKT

[garn]

Re: Hotpoint condenser pump which 1 part number

hear i am again i must be confused sum how C00306876. which iv been given also i have the alternative on board the van PMP 992 Connect which looks exactly as C00306876. see pic but does not fit.
if you look at the outlet of the pump rite hand side pic where the black pipe goes is totally different from C00306876. and does not fit the body mount.

[garn]

Re: Hotpoint condenser pump which 1 part number

Ok soory for the mox up working of a mobile cant see so good its Age related
Paul

[Author]

Posts