[garn]

Re: amica appliaces

hi jim merry xmas
i was getting worried thanks for the reply
the problem I’m having is competing for repair and sales with argos
coop
the majority of people in my catchment area are dedicated hotpoint users.
i can give a quote to refurb and even give them a very long warranty
but they compare this with the cheap things on the market so I’m loosing out on a repair or a sale.
i quote for a simple brush change or pump door energizer.
and i get i can buy a new one Penny’s even worse with dryers new vented
for £68.00
or the classier models for £80.
i also supply zanussi tricity bendix whirpool which are really good quality
but its competing with the lower end of the market.
paul.

[garn]

Re: warranty reg haier

iv maneged to find a warrenty dealer but he is 237 miles away
by the cost of the fuel to day!
it would be cheaper for haier to send 4 units free rather than an enginer!
comet price £220 and there selling
il look forward to writing a review 😆 🙂 🙂 how long i dont know 8) 8

[garn]

Re: warranty reg haier

its a case of the bargin price rep phone call on a tusday morning
il think il stick to bdc.

[garn]

Re: warranty reg haier

i know mate i just installed one for a customer this evening its a chuck away i just hope they last 12 months
they came from up your way the coop no warranty info with them
dirty cheap im geting 120{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} MARK UP ON THEM

[garn]

Re: heavy duty washing machine 20kg

Penguin45 wrote:http://jla.com/

Chris.

thanks mate il give them a bell tomorrow

[garn]

Re: Renting Appliances

its a good idea if you can get 20 units out there the figures are really good
over 2 & 3 year contracts students & disabled tend to hire a lot
so do hospital staff IE doctors there always on the move every 10 months
basic appliance’s are best IE hotpoint creda spares are reasonable and it doesnt take long if you had to refurb the whole unit.IE wm wma seres
bendix are very good to no calls on them.

[garn]

THANKS MATE

[garn]

inspecting the appliance tomorrow
diagnostics over the phone sounds like drum bearing .leaking to these models are known to have pump problems to especially in the first year.

[garn]

Re: haier washing machines

just found kwatt review march08
only just had broadband in thees mountains the past 9 months
and now haier machines!
by the look of the reliability iv landed my self in it!.
and comet are not the only distributers. leos coop two and my self of course.
: :clown: thanks

[garn]

Re: HPT TDL30

iadom wrote:To replace the original metal air duct with the plastic one you need a complete drum and duct kit. That includes a new drum and all the other parts required including, new fan, back panel, stats, filter and all seals. You cannot just fit the plastic duct.

Kit is part number 1702495.

170236 does not appear to be a valid part number.

Jim.

NB. You would be better served if you are in the trade if you apply for trade access. 😉

THANKS IADOM JUST TALKED TO MY SUPPLER THE KITMDA170236 WITH STAT USED TO COME WITH THE FLUF FILTER THAY HAVE SPLIT IT UP SEPARATE ORDER £7.50 MORE HAVE A LOOK IN MASTERPARTS!
USE A V4 KIT FOR THE BACK.

SPENT A LOT OF TIME IN MILNROW AND IN BERNAD MANNINGS PUB
TO . HOW DO I APPLY FOR TRADE ACCSESS .

[garn]

Re: electra gl2 (italy)

Alex wrote:Capacitor used to play up, but then you would get a poor wash, and failure to ramp into spin. Think it was 16mf

Also watch for overfilling, then the water would not evacuate enough before spin, and the drum would send the water around in a vortex, and would not drain properly. Water level on Cottons 1″ up the front plastic door inner, on delicates halfway between the lip of the door seal and the centre of the door handle.

Alex
ok thanks for the info
il check it out

[garn]

Alex wrote:Where did 50 odd years come from? If you give me the serial number, on a silver palate at the rear just below the tub breather pipe, I can date it to the month.

Electra GL2 500 spin, was sold through the Electricity Boards 1974 to 1977, made by Zanussi along with the 300 spin GL1. The bearings on those was bigger than the present day ones on the 1,000 spin machine.

Prior to that was the L1 & L2 1972 to Oct 1794. These were eventually replaced by the Hoover Electra A3E02 range. No Electra ones were the DL range.

How come it needs brushes is beyond me, they used an induction motor?

Zanussi only entered the uk in the mid 60’s, but was badged Imperial.

Alex

thanks alex
a pensioner saw my van this morning
her husband bought it many years he worked for the old electricity board high street shops.
the machine was running at the time
couldent withdraw it.
symtoms are clothes are damp on the spin

[garn]

Re: Indesit W123 not taking in water

indesit w133 & w143
try filler valve solanoids commen fault on w123 & w143 also the same on the ariston margarita looks like timer problems can be valve sometimes can itermitant

[Author]

Posts